Efficiency And Drive Modes; Blue-Q (Variant) - Still RX20 Series Original Instructions Manual

Operation
Efficiency and drive modes

Blue-Q (variant)

Functional description
The Blue-Q efficiency mode affects both the
drive unit and the activation of the additional
consumers, and reduces the truck's energy
consumption. Blue-Q can be switched on and
off via a softkey.
If efficiency mode is switched on, the acceler-
ation behaviour of the truck changes to make
acceleration more moderate.
When travelling at low speeds, normally when
manoeuvring, no reduction is noticeable even
if efficiency mode is switched on. For moder-
ate speeds from approx. 7 km/h, acceleration
is gentler. Therefore, on distances of up to
approx. 40 m, lower speeds are reached than
would be the case if the efficiency mode was
not activated. As in "STILL Classic" mode, the
maximum speed is 20 km/h.
has no influence on:
• Maximum speed
• Climbing capability
• Pulling force
• Braking characteristics
Effects on additional consumers
The following table shows the specific conditions that cause certain auxiliary devices to shutdown
when Blue Q is activated. The additional consumers available depend on the truck equipment.
Shut-off
Front working
spotlight*
Rear working spotlight*
Roof spotlight*
Headlight*
Front wiper
Rear wiper
Roof wiper
Seat heater
Truck is stationary
Seat switch
X
X
X
X
X
X
X
X
56368011531 EN - 06/2019 - 02
Efficiency and drive modes
Drive direction
X Reverse > 3 km/h
X Forwards
X > 3 km/h
X
X Reverse > 3 km/h
X Forwards
X
-
4
-
-
-
129