Display-Operating Unit; Access Authorisation With Pin Code (Variant) - Still RX20 Series Original Instructions Manual

Operation
NOTE
For the variant with
"Access authorisation with PIN code", see
•
the relevant section.
"FleetManager", see the "original operating
•
instructions for FleetManager".

Display-operating unit

Access authorisation with PIN code
(variant)
Trucks equipped with the "Access authori-
sation with PIN code" variant are protected
against unauthorised use by a PIN code. So
that the same truck can be used by different
drivers, individual PIN codes can be specified.
When the key switch is switched on, the
"Access authorisation" input menu appears.
All hydraulic functions and drive functions of
the truck are blocked. In the StVZO (German
Road Traffic Licensing Regulations) variant,
the function of the hazard warning system
(variant) is guaranteed.
– To activate the blocked functions, use the
softkeys to enter the PIN code.
– To confirm, push the
If the input was correct, the display changes to
the main display. The truck is ready for use.
– If the input was incorrect, enter the PIN code
again.
NOTE
The authorised service centre can configure
access authorisation so that the PIN code
has to be re-entered each time after someone
leaves the truck.
When the driver's seat is occupied again, the
message
Log in
then changes to the "Access authorisation"
input menu.
button.
appears. The display
56368011531 EN - 06/2019 - 02
Display-operating unit
4
119