Selecting The Drive Direction - Still RX20 Series Original Instructions Manual

4
Traction

Selecting the drive direction

The drive direction of the truck must be
selected using the drive direction switch
before attempting to drive. The method of
actuating the drive direction switch depends
on the operating devices included in the truck's
equipment.
NOTE
The drive direction can also be changed
during travel. Your foot can remain on the
accelerator pedal while you do so. The truck is
then decelerated and accelerated again in the
opposite direction (reversing).
The indicator for the selected drive direction
("forwards" (1) or "backwards" (2)) lights up on
the display-operating unit.
Neutral position
If leaving the truck for a prolonged period, the
neutral position must be selected in order to
avoid the truck suddenly moving off due to an
inadvertent actuation of the accelerator pedal.
– Briefly select the drive direction switch for
the direction opposite to the current drive
direction.
The drive direction indicator on the display-
operating unit goes out.
NOTE
When the seat is vacated, the selected drive
direction is set to the "neutral position". To
drive, the drive direction switch must be
actuated again.
142 56368011531 EN - 06/2019 - 02
Operation
1
2