Display Messages; Behaviour When The Explosion-Protection Warning Lights Are Illuminated - Still RX20 Series Original Instructions Manual

4

Display messages

Display messages
Behaviour when the explosion-pro-
tection warning lights are illuminated
DANGER
Risk of explosion!
During operation, the temperatures,
wear values and insulation values of
various components are monitored by
sensors. The explosion-protection
warning lights indicate when limit
values are reached.
If dangerous limit values are detected,
the truck controller automatically
shuts down the drive unit. This
automatic emergency shutdown
indicates a serious malfunction.
– Do not operate the truck if the
explosion-protection warning light
is illuminated.
– Inform the safety officer.
– Notify the authorised service
centre.
WARNING
Risk of injury from automatic emergency shutdown!
As soon as one of the explosion-protection warning
lights is illuminated, the driving functions of the truck
are switched off.
– Stop the truck safely.
This section describes the actions required
when an explosion-protection warning light is
flashing.
As a general rule:
Only the safety officer may decide whether
the truck can be removed from the potentially
explosive area. The cause of the automatic
emergency shutdown must be determined
and remedied by the authorised service
centre. The safety officer must order the reset
button to be pressed.
NOTE
Please note the section entitled "Automatic
emergency shutdown" in the chapter entitled
"Procedure in emergencies".
286
1
2
3
4
1
2
3
4
56368011531 EN - 06/2019 - 02
Temperature of the right-hand traction
motor
Temperature of the left-hand traction
motor
Pump motor temperature
Insulation warning
Operation
6219_901-017