When Using In-Circuit Emulator Ie-78K0K1-Et - NEC 78K0 User Manual

A.5.2

When using in-circuit emulator IE-78K0K1-ET

Notes 1, 2
IE-78K0K1-ET
In-circuit emulator
IE-70000-98-IF-C
Interface adapter
IE-70000-CD-IF-A
PC card interface
IE-70000-PC-IF-C
Interface adapter
IE-70000-PCI-IF-A
Interface adapter
NP-80GK
NP-H80GK-TQ
Emulation probe
TGK-080SDW
Conversion
adapter
NP-80GC
Emulation probe
EV-9200GC-80
Conversion
socket
NP-80GC-TQ
NP-H80GC-TQ
Emulation probe
TGC-080SBP
Conversion
adapter
Notes 1. IE-78K0K1-ET is supplied with a power supply unit and PCI bus interface adapter IE-70000-PCI-IF-A.
It is also supplied with integrated debugger ID78K0-NS and a device file as control software.
2. Under development
Remarks 1. NP-80GK, NP-H80GK-TQ, NP-80GC, NP-80GC-TQ, and NP-H80GC-TQ are products of Naito
Densei Machida Mfg. Co., Ltd.
TEL: +81-45-475-4191 Naito Densei Machida Mfg. Co., Ltd.
2. TGK-080SDW and TGC-080SBP are products of TOKYO ELETECH CORPORATION.
For further information, contact: Daimaru Kogyo, Ltd.
Tokyo Electronics Department (TEL +81-3-3820-7112)
Osaka Electronics Department (TEL +81-6-6244-6672)
3. EV-9200GC-80 is sold in five-device units.
4. TGK-080SDW and TGC-080SBP are sold in individual units.
606
APPENDIX A DEVELOPMENT TOOLS
The in-circuit emulator serves to debug hardware and software when developing
application systems using a 78K0/Kx1 product. It corresponds to the integrated
debugger (ID78K0-NS). This emulator should be used in combination with a power
supply unit, emulation probe, and the interface adapter required to connect this emulator
to the host machine.
This adapter is required when using a PC-9800 series computer (except notebook type)
as the host machine (C bus compatible).
This is PC card and interface cable required when using a notebook-type computer as
the host machine (PCMCIA socket compatible).
This adapter is required when using an IBM PC/AT compatible computer as the host
machine (ISA bus compatible).
This adapter is required when using a computer with a PCI bus as the host machine.
This is supplied with IE-78K0K1-ET.
This probe is used to connect the in-circuit emulator and target system, and is designed
for an 80-pin plastic TQFP (GK-9EU type).
This conversion adapter is used to connect the NP-80GK and target system board on
which an 80-pin plastic TQFP (GK-9EU type) can be mounted.
This probe is used to connect the in-circuit emulator and target system, and is designed
for an 80-pin plastic QFP (GC-8BT type).
This conversion socket is used to connect the NP-80GC and target system board on
which an 80-pin plastic QFP (GC-8BT type) can be mounted.
*
This probe is used to connect the in-circuit emulator and target system, and is designed
for an 80-pin plastic QFP (GC-8BT type).
This conversion adapter is used to connect the NP-80GC-TQ or NP-H80GC-TQ and a
target system board on which an 80-pin plastic QFP (GC-8BT type) can be mounted.
User's Manual U15947EJ2V0UD