Registers Controlling Low-Voltage Detector - NEC 78K0 User Manual

25.3 Registers Controlling Low-Voltage Detector

The low-voltage detector is controlled by the following registers.
• Low-voltage detection register (LVIM)
• Low-voltage detection level selection register (LVIS)
(1) Low-voltage detection register (LVIM)
This register sets low-voltage detection and the operation mode.
This register can be set by a 1-bit or 8-bit memory manipulation instruction.
CHAPTER 25 LOW-VOLTAGE DETECTOR
*
User's Manual U15947EJ2V0UD
481