Debugging Tools (Hardware); When Using In-Circuit Emulator Qb-78K0Skx1; When Using On-Chip Debug Emulator Qb-Mini2; Debugging Tools (Software) - NEC 78K0S/KU1+ User Manual

A.5 Debugging Tools (Hardware)
<R> A.5.1 When using in-circuit emulator QB-78K0SKX1
QB-78K0KX1
In-circuit emulator
QB-50-EP-01T
Emulation probe
QB-10MA-EA-01T
Exchange adapter
QB-10MA-NQ-01T
Target connector
Specifications of pin header on
target system
A.5.2 When using on-chip debug emulator QB-MINI2
QB-MINI2
On-chip debug emulator
programming function
Specifications of pin header on
target system
A.6 Debugging Tools (Software)
<R> ID78K0S-QB
(supporting QB-78K0SKX1
and QB-MINI2)
Integrated debugger
(accessory)
<R> SM+ for 78K0S/Kx1+
System simulator
Note
DF789234
Device file
Note DF789234 is a common file that can be used with the RA78K0S, CC78K0S, ID78K0S-QB, and SM+ for
78K0S/Kx1+.
APPENDIX A DEVELOPMENT TOOLS
This in-circuit emulator serves to debug hardware and software when developing application
systems using the 78K0S/Kx1+. It supports to the integrated debugger (ID78K0-QB). This
emulator should be used in combination with a power supply unit and emulation probe, and the
USB is used to connect this emulator to the host machine.
This emulation probe is flexible type and used to connect the in-circuit emulator and target
system.
This exchange adapter is used to perform pin conversion from the in-circuit emulator to target
connector.
This target connector is used to mount on the target system.
0.635 mm × 0.635 mm (height: 6 mm)
This on-chip debug emulator serves to debug hardware and software when developing
application systems using all flash microcontrollers (including the 78K0S/Kx1+). It is available
also as a flash memory programmer dedicated to microcontrollers incorporating a flash
memory.
16-pin general-purpose connector (2.54 mm pitch)
This debugger supports the in-circuit emulators for the 78K0S/Kx1+ Series. ID78K0S-QB is
Windows-based software.
Provided with the debug function supporting C language, source programming, disassemble
display, and memory display are possible. This is used with the device file (DF789234) (sold
separately).
It is provided with the in-circuit emulator QB-78K0SKX1.
µ
Ordering number: S××××ID78K0S-QB (not for sale)
This is a system simulator for the 78K/0S series. SM+ for 78K0S/Kx1+ is Windows-based
software.
This simulator can execute C-source-level or assembler-level debugging while simulating the
operations of the target system on the host machine.
By using SM+ for 78K0S/Kx1+, the logic and performance of the application can be verified
independently of hardware development. Therefore, the development efficiency can be
enhanced and the software quality can be improved.
This simulator is used with a device file (DF789234) (sold separately).
µ
Part number: S××××SM789234-B
This is a file that has device-specific information.
It is used with the RA78K0S, CC78K0S, ID78K0S-QB, and SM+ for 78K0S/Kx1+ (all sold
separately).
µ
Part number: S××××DF789234
User's Manual U18172EJ2V0UD
301