When Using In-Circuit Emulator Qb-Mini2; When Using In-Circuit Emulator Ie-78K0S-Ns Or Ie-78K0S-Ns-A; When Using In-Circuit Emulator Qb-78K0Skx1Mini - NEC 78K0S/KB1+ User Manual

<R>
A.5.2 When using in-circuit emulator QB-MINI2
QB-MINI2
On-chip debug emulator with
programming function
Specifications of pin header on
target system
A.5.3 When using in-circuit emulator IE-78K0S-NS or IE-78K0S-NS-A
IE-78K0S-NS
In-circuit emulator
IE-78K0S-NS-A
In-circuit emulator
IE-70000-MC-PS-B
AC adapter
IE-70000-CD-IF-A
PC card interface
IE-70000-PCI-IF-A
Interface adapter
IE-789234-NS-EM1
Emulation board
NP-30MC
Emulation probe
NSPACK30BK
YSPACK30BK
Conversion connector
Specifications of pin header on
target system
Remarks 1. NP-30MC is a product of Naito Densei Machida Mfg. Co., Ltd.
2. NSPACK30BK and YSPACK30BK are products of TOKYO ELETECH CORPORATION.
A.5.4 When using in-circuit emulator QB-78K0SKX1MINI
QB-78K0SKX1MINI
In-circuit emulator
Specifications of pin header on
target system
APPENDIX A DEVELOPMENT TOOLS
This on-chip debug emulator serves to debug hardware and software when developing
application systems using all flash microcontrollers (including the 78K0S/Kx1+). It is available
also as a flash memory programmer dedicated to microcontrollers incorporating a flash
memory.
16-pin general-purpose connector (2.54 mm pitch)
This in-circuit emulator serves to debug hardware and software when developing application
systems using the 78K/0S Series. It supports the integrated debugger (ID78K0S-NS) and is
used in combination with an AC adapter, an emulation probe, and an interface adapter for
connecting the host machine.
This in-circuit emulator has a coverage function in addition to the functions of the IE-78K0S-
NS, and enhanced debugging functions such as an enhanced tracer function and timer
function.
This adapter supplies power from 100 to 240 VAC outlets.
This PC card and interface cable are required when using a notebook type PC as the host
machine (PCMCIA socket supported).
This adapter is required when using a personal computer incorporating the PCI bus is used as
the host machine.
This emulation board serves to emulate peripheral hardware inherent to the device. It is used
in combination with an in-circuit emulator. A target cable is provided.
This probe is used to connect the in-circuit emulator to the target system and is designed for
use with a 30-pin plastic SSOP (MC-5A4 type).
This conversion connector connects the NP-30MC to a target system board designed to mount
a 30-pin plastic SSOP (MC-5A4 type).
• NSPACK30BK: Connector for connecting target
• YSPACK30BK: Connector for connecting emulator
0.635 mm × 0.635 mm (height: 6 mm)
For further information, contact: Naito Densei Machida Mfg. Co., Ltd. (TEL +81-42-750-4172)
For further information, contact Daimaru Kogyo Co., Ltd.
Tokyo Electronics Department (TEL: +81-3-3820-7112)
Osaka Electronics Department (TEL: +81-6-6244-6672)
This in-circuit emulator serves to debug hardware and software when developing application
systems using the 78K/0S/Kx1+ Series. It supports the integrated debugger (ID78K0S-QB)
and is used in combination with an AC adapter, a target cable, and a USB cable for connecting
the host machine.
0.635 mm × 0.635 mm (height: 6 mm)
User's Manual U17446EJ3V1UD
373