Configuration
Front Panel
First set the RS-232 parameters:
Next, select RS-232 as the remote control interface.
Press the LCL/RMT button to begin remote operation via the RS-232 interface.
TM-XDOP-01XN
Step # Do This
1
MENU
2
5 times
3
ENTER
4
ENTER
5
or
Select the baud rate.
6
ENTER
7
or
Select the flow control option.
8
ENTER
Step # Do This
1
MENU
2
4 times
3
ENTER
4
ENTER
You Will See
ERROR MSGS
REMOTE CONFIG
RS-232 Cfg
Baud 9600
Baud #####
Flow Ctl None
Options are
None = no flow control
Hdwr = CTS/DTS hardware handshake
XON = software, XON/XOFF characters used
Settings are saved.
You Will See
ERROR MSGS
REMOTE SELECT
RS-232
RS-232 setting is saved.
RS-232 Operation
4–17