Ac Input Power; Ac Input Connector; Figure 2-4 Ac Input Connector For 6000 Watt Units - Xantrex XDC 10-1200 Operating Manual

AC Input Power

WARNING
Disconnect AC power from the unit before removing the connector cover. Live
line voltages may be exposed when the cover is removed.
WARNING
A safety ground wire must be connected to the unit as shown in Figure 2-4 and
Figure 2-6 to ensure operator safety
CAUTION
When the power switch is turned on, output voltage or current previously set may
be applied to loads, depending on the supply configuration.

AC Input Connector

The AC input connector is a standard wire clamp terminal block with 3-phase
connectors and a chassis ground connector. The safety ground wire, alternatively,
may be connected to the chassis using a ring tongue on the ground stud as shown
in Figure 2-4 and Figure 2-6.

Figure 2-4 AC Input Connector for 6000 Watt units

TM-XDOP-01XN
Ground Connection
3-Phase Terminal Block Connectors
AC Input Power
2–7