IEEE-488.2/SCPI Syntax and Style
Parameters
Units of Measure and Multipliers
Refer to IEEE 488.2, section 7.7.3 for the definition of units of measure.
The default units of measure include:
•
•
•
•
The supported optional multipliers include:
•
•
Important:
while the IEEE standard specifies uppercase. Both combinations are supported.
TM-XDOP-01XN
V (Volt – voltage)
A (Ampere – current)
W (Watt – power)
S (seconds – time)
m (milli)
k (kilo)
The SI standard for these multipliers is specifically lowercase,
IEEE-488.2/SCPI Syntax and Style
C–3