Xantrex XDC 10-1200 Operating Manual page 108

Operation
To set the voltage limits:
Step # Do This
1
2
3
4
5
6
7
8
3–46
MENU
until you see the "SETPT LIMIT"
option
ENTER
ENTER
Use the Voltage knob, arrow keys, or
numeric keypad to enter a value. The value
must be within 0V to 103% of the unit's
rated voltage, and must be higher than the
voltage setpoint.
ENTER
Use the Voltage knob, arrow keys, or
numeric keypad to enter a value. The value
must be within 0V to 103% of the unit's
rated voltage and must be lower than the
voltage setpoint.
ENTER
You Will See
ERROR MSGS
SETPT LIMIT
Voltage Limit
High 0V
High #####V
Low 0V
The Maximum setting is
saved and the Minimum
setting appears.
Low #####V
The setting is saved and
the display returns to its
default operating mode.
TM-XDOP-01XN