Xantrex XDC 10-1200 Operating Manual page 109

To set the current limits:
TM-XDOP-01XN
Step # Do This
1
MENU
2
until you see the "SETPT LIMIT"
option
3
ENTER
4
5
ENTER
6 Use the Current knob, arrow keys, or
numeric keypad to enter a value. The value
must be within 0A to 103% of the unit's
rated current and must be higher than the
current setpoint.
7
ENTER
8 Use the Voltage knob, arrow keys, or
numeric keypad to enter a value. The value
must be within 0A to 103% of the unit's
rated current and must be lower than the
current setpoint.
9
ENTER
Power Supply Operation
You Will See
ERROR MSGS
SETPT LIMIT
Voltage Limit
Current Limit
High 0A
High #####A
Low 0A
The Maximum setting is
saved and the Minimum
setting appears.
Low #####A
The setting is saved and
the display returns to its
default operating mode.
3–47