Xantrex XDC 10-1200 Operating Manual page 235

Table C-1 IEEE 488.2 Commands
Function SCPI Commands
Query Power On
*PSC?
Status Clear [:]STATus[<channel>]:POSClear?
Power-On Status *PSC
Clear [:]STATus[<channel>]:POSClear <on-off-state>
Recall
*RCL
[:]SYSTem[<channel>]=RECall <setting_location>
Reset
*RST
[:]SYSTem[<channel>]:RESet
Save User Settings
*SAV
[:]SYSTem[<channel>]:SAVE[USER]
<setting_location>
Save Default
*SDS
Settings [:]SYSTem[<channel>]:SAVE:DEFault
<setting_location>
Query Service
*SRE?
Request Enable [:]STATus[<channel>]:SREQuest:ENABle?
Service Request *SRE
Enable [:]STATus[<channel>]:SREQuest:ENABle <status-
enable>
Read Status Byte
*STB?
[:]STATus[<channel>]:SBYTe[EVENt]?
Description
Query Power-On Status Clear
setting
Controls the automatic power-on
clearing of the Service Request
Enable Register, Standard Event
Status Enable Register, Parallel
Poll Enable Register and other
event enable registers. Possible
values are 0 (leave them alone) or
1 (clear them).
Restores the settings of unit from
values stored in memory.
Performs a device reset. Set the
power supply to a known state that
is independent of the use history
of the device.
Stores the current setting of the
device in local memory. Scope is
same as *RST
Save the factory default settings.
Query the Service Request Enable
Register bits.
Set the Service Request Enable
Register bits.
Read the status byte and Master
Summary Status bit.
Query
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A