Xantrex XDC 10-1200 Operating Manual page 96

Operation
Table 3-2 To Program a Sequence
Step # Do This
11
12
13
14
15
3–34
Enter the step OVP level.
ENTER
ENTER
or . Use the scroll keys to
select how you want to advance to the next step:
• Set Step Time waits for a certain period. See
the "Setting step advance by time:" table.
• Wait for Trig waits for a trigger event. See
the "Setting step advance by trigger:" table.
Set the step advance method.
ENTER
To go to the next step in the sequence.
This will return you to step 7 in this table. Repeat
steps 7 to 14 for all remaining steps in the
sequence.
EXIT
Press to exit auto sequence
programming and return to the default screen.
You Will See
S01 ####V
Set Step Time
To Next Step
Step 2
TM-XDOP-01XN