Table 1-4 Front Panel Functions - Xantrex XDC 10-1200 Operating Manual

Table 1-4 Front Panel Functions

Key Functions
Voltage Setpoint Enter voltage
Current Setpoint Enter current
Output ON/OFF Toggle
Local/Remote Mode Toggle
Protection Set OVP level
UVP level
OCP level
UCP level
OPP level
UPP level
Fold Mode
Read Alarms Read alarm msgs
Store User Setting Select 1 to 10
Recall Factory default
Last setting
User setting
Auto sequence
Auto Sequence Operation (Run/Pause, Trigger, Stop)
MENU Access menu functions
ENTER Make a selection
UP/DOWN Scroll to view selections, increment numerical entries
CE Clear entry
Numeric keypad Enter data
EXIT Cancel operation
Special Key Functions
UP View power readback (from default window)
CE Deletes a selected user setting from memory (Hold for 2 seconds)
EXIT Exit auto sequence
Menu Function
ERROR MSGS Read error msgs
USER LINES Aux line A
Aux line B
PON CONFIG Factory default
Last setting
User setting
Auto sequence
S/D RECOVERY Select OTP
recovery
REMOTE Select remote interface
SELECT
TM-XDOP-01XN
Enter OV level
Enter UV level
Enter OC level
Enter UC level
Enter OP level
Enter UP level
Select fold mode
Select 1 to 10
Select 1 to 10
Configure aux line A
Configure aux line A
Set output on/off
Set output on/off
Select 1 to 10
Select 1 to 10
Select AC Off recovery
S/D if tripped? Select Y or N
S/D if tripped? Select Y or N
S/D if tripped? Select Y or N
S/D if tripped? Select Y or N
S/D if tripped? Select Y or N
Select fold delay
Set aux line A polarity
Set aux line B polarity
Set output on/off
Set output on/off
Front Panel
1–7