Configure Display
The DISPLAY CONFIG menu option allows you to select the readback values
displayed when the power supply is operating in its default state.
The factory default is to display voltage and current readback, but you can also
choose voltage and power, current and power, or voltage, current, and power.
This table shows how to access and work with the DISPLAY CONFIG option.
a. You can also press MENU repeatedly to bring up the Display Config option.
TM-XDOP-01XN
Step # Do This
1
MENU
2
until you see the "DISPLAY CFG"
a
option
3
ENTER
4
Using the arrow keys, select from
Show V and I and Show V and P.
5
ENTER
Power Supply Operation
You Will See
ERROR MSGS
DISPLAY CFG
Show V and I
Show V and I
The setting is saved.
3–43