Table C-15 Legacy Commands - Xantrex XDC 10-1200 Operating Manual

Table C-15 Legacy Commands

Function SCPI Command
Reset CLR
Query System Error ERR?
Identification Query ID?
Read Output
IOUT?
Current
Set High Current IMAX <current>
Limit
Set (Immediate)
ISET <current>
Current Setpoint
Set Output State
OUT <on-off-
state>
Set Over Voltage
OVSET <voltage>
Protection Level
ROM Query ROM?
Clear Output
RST
Protection
Set High Voltage
VMAX <voltage>
Limit
Read Output VOUT?
Voltage
Set (Immediate)
VSET <voltage>
Voltage Setpoint
Description
Equivalent to *RST and SYSTem:RESet commands
Performs a device reset. Set the power supply to a known state that is
independent of the use history of the device
Equivalent to SYSTem:ERRor? command except that the return string
contains the command
Returns the next error in the instrument's error queue
Query identification string. (Model ID and Version)
Equivalent to MEASure:CURRent? command
Read output current
Equivalent to SOURce:CURRent:LIMit:HIGH <current> command.
Set upper limit of current setpoint range (soft limits)
Equivalent to SOURce:CURRent command.
Change current setpoint
Equivalent to OUTP <on-of-state> command.
Enable/disable the power supply output
Equivalent to SOURce:VOLTage:PROTection:OVER:LEVel <voltage>
command.
Set the over voltage protection level
Queries the main firmware version
Equivalent to OUTPut:PROTection:CLEar command.
Clears the protection mechanism
Equivalent to SOURce:VOLTage:LIMit:HIGH <voltage> command.
Set upper limit of voltage setpoint range (soft limits)
Equivalent to MEASure:VOLTage? command.
Read output voltage
Equivalent to SOURce:VOLTage command.
Change voltage setpoint
Query
N/A
N/A
N/A
N/A
Yes
Yes
Yes
Yes
N/A
N/A
Yes
N/A
Yes