Change Stored Settings - Xantrex XDC 10-1200 Operating Manual

Operation
To create and save a user setting:
1. Set up the power supply with all the parameters you require.
2. Press
3. Select a memory location, and press
The following table demonstrates how to set and save current and voltage
settings:
Step # Do This
1
2
3
4
5
6
7
8
a. (unused) appears with Set 1 if there are no saved settings in the system. Press Enter to save your

Change Stored Settings

To change a stored setting, overwrite it with a new setting, or select the setting,
press CE and hold it for a few seconds to clear the setting from memory.
3–22
.
STORE
VOLTAGE
Turn the Voltage knob or use the
numeric keypad to enter a voltage
setpoint.
ENTER
CURRENT
Turn the Current knob or use the
numeric keypad to enter a current
setpoint.
ENTER
STORE
ENTER
setting as Set 1. If (unused) does not appear, then you can overwrite Set 1 with your new setting or use
the numeric keypad or arrow keys to find the next unused set number. You can also press CE to clear
an existing setting and then press ENTER to replace the cleared setting with your new setting.
to save your settings.
ENTER
You Will See
Set #####V
Set #####V
Your voltage setting appears on the
display.
Your voltage setting is saved.
Set #####A
Your current setting appears on the
display.
Your current setting is saved.
a
Set 1 (unused)
Set 1
Your voltage and current setting is
now saved as Set 1.
TM-XDOP-01XN