Xantrex XDC 10-1200 Operating Manual page 110

Operation
To set the power limit:
Step # Do This
1
2
3
4
5
6
7
8
9
3–48
MENU
until you see the "SETPT LIMIT"
option
ENTER
2 times
ENTER
Use the arrow keys, or numeric keypad to
enter a value. The value must be within 0W
to 103% of the unit's rated power and must
be higher than the power setpoint.
ENTER
Use the Voltage knob, arrow keys, or
numeric keypad to enter a value. The value
must be within 0W to 103% of the unit's
rated power and must be lower than the
power setpoint.
ENTER
You Will See
ERROR MSGS
SETPT LIMIT
Voltage Limit
Power Limit
High #####W
High #####W
Low #####W
The Maximum setting is
saved and the Minimum
setting appears.
Low #####W
The setting is saved and
the display returns to its
default operating mode.
TM-XDOP-01XN