Table C-1 Ieee 488.2 Commands - Xantrex XDC 10-1200 Operating Manual

Table C-1 IEEE 488.2 Commands

Function SCPI Commands
Clear Status
*CLS
[:]STATus[<channel>]:CLEAr
Standard Event
*ESE?
Status Enable Query [:]STATus[<channel>]:STANdard:ENABle
Standard Event *ESE
Status Enable [:]STATus[<channel>]:STANdard:ENABle <ESE-
word>
Standard Event *ESR?
Status Register [:]STATus[<channel>]:STANDard[:EVENt]?
Query
Identification Query *IDN?
[:]SYSTem[<channel>]:IDENtify?
Individual Status
*IST?
Query
Operation Complete
*OPC
Command
Query Operation
*OPC?
Complete
Command
Option
*OPT?
Identification Query [:]SYSTem[<channel>]:OPTIon
Parallel Poll Enable
*PRE?
Register Query
Parallel Poll Enable *PRE <status-enable>
Register Command
Description
Clears the status data structures.
Query the Standard Event Status
Enable register settings.
Set the Standard Event Status
Enable Register bits.
Query Standard Event Status
Register.
Query identification string.
(Manufacturer's information.)
Reads the current state of the
IEEE 488.1 defined "ist" local
message in the device
Causes the device to generate the
operation complete message in the
Standard Event Status register
when all pending selected device
operations have finished
Place and ASCII character "1"
into the output queue when all
pending operations have been
finished. See IEEE 488.2-1992
section 12.5.3.
Identify reportable device options N/A
Query the Parallel Poll Enable
Register setting
Sets the Parallel Poll Enable
Register bits. See IEEE 488.2
section 11.6 for details.
Query
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A