Xantrex XDC 10-1200 Operating Manual page 86

Operation
To restore the last setting:
Step #
1
2
To select a stored user setting:
Step #
1
2
3
a. This prompt appears when there is at least one saved setting in memory. If there are
To select a factory setting:
Step #
1
2
To select Auto Sequence:
Step # Do This
1
2
3
a. This prompt appears when there is at least one saved programs in memory. If there are no saved
For operation of Auto Sequence mode, see "Using Auto Sequencing" on page 3–42.
3–24
Do This
Press once.
RECALL
Press to restore last setting.
ENTER
Do This
Press twice.
RECALL
ENTER
Use the numeric keypad or arrow
keys to enter a value between 1 and 10.
Use the numeric keypad or arrow
ENTER
keys to enter a value between 1 and 10.
no saved settings, the display reads None Saved and then automatically returns to
User Settings.
Do This
Press 3 times.
RECALL
This restores the setpoints to factory defaults.
ENTER
RECALL
Press 4 times.
ENTER
Use the numeric keypad or arrow keys to enter a
value between 1 and 10.
This runs the selected Auto Sequence program.
ENTER
programs, the display reads None Saved and then automatically returns to Auto Sequence.
You Will See
Last Settings
You Will See
User Setting
a
User Set ##
You Will See
Factory Preset
You Will See
Auto Sequence
User Set ##
TM-XDOP-01XN
a