Making Connections For Remote Control; Figure 4-1 View Of Remote Interface Connections - Xantrex XDC 10-1200 Operating Manual

Making Connections for Remote Control

Making Connections for Remote Control
See Figure 4-1, "View of Remote Interface Connections" on page 4–3 for the
locations of the RS-232, GPIB and CANbus connectors and the locations and the
pin numbers of the User Lines and the Analog Programming Lines. GPIB and
CANbus are optional.

Figure 4-1 View of Remote Interface Connections

Removable mating connectors are supplied for the user lines and program lines,
while the mating connectors and cables for the other ports are supplied by the
user.
TM-XDOP-01XN 4–3