Scpi - Xantrex XDC 10-1200 Operating Manual

Press the LCL/RMT button to begin remote operation via the analog interface.

SCPI

To select which setpoints to control via analog programming lines, use the
command:
SYST:REM:SOUR {AVOL|ACUR|AVC}
Where
•
•
•
To select the voltage level:
SYST:COMM:APR:LEV {5|10}
Where
"5" is the 0-5V range, and
"10" is the 0-10V range
To put the unit into remote control:
SYST:REM:STAT REM
TM-XDOP-01XN
Step # Do This
1
MENU
2
4 times
3
ENTER
4
or
Select desired option.
5
ENTER
AVOL (Analog VOLtage) selects only voltage to be programmed via the
analog programming lines
ACUR (Analog CURrent) selects only current to be programmed via the
analog programming lines
AVC (Analog Voltage and Current) selects voltage and current to be
programmed via the analog programming lines
Remote Analog Operation
You Will See
ERROR MSGS
REMOTE SELECT
RS-232
Analog V&I,
Analog V, or
Analog I
Setting is saved.
4–9