Start" Tab; Connection" Tab; Figure 22: Contents Of The Horizontal Tab Start; Figure 23: Start > Main Menu > Channel Selection List - WAGO 750-486 Manual

WAGO-I/O-SYSTEM 750
750-486 4AI 0/4-20 mA, Ex i
3. Select the target directory in which you want to save the new parameter file.
4. Click [Save] in the standard Windows dialog.
The parameter file is then saved to the target directory that you have selected.
7.1.1.3.2

„Start" Tab

Click the Start tab in the horizontal tab menu to display the following selection
options in the main menu.

Figure 22: Contents of the Horizontal Tab Start

If you select the Channel settings menu item in the vertical tab menu, you can
also choose the required I/O module channel in the main menu.
Figure 23: Start > Main Menu > Channel Selection List
The exact meaning of the individual selection options is described in the "Main
Menu" dialog (see "Parameterization Dialog" > ... > "Main Menu").
7.1.1.3.3

„Connection" Tab

Click the Connection tab in the horizontal tab menu to display the following
selection options in the main menu.
If the is no connection to the I/O module, the following button appears:

Figure 24: Connection Tab for Disconnected I/O Module

Click the [Connect] button to establish a connection to the I/O module.
If there is a connection to the I/O module, the following button appears:

Figure 25: Connection Tab for Connected I/O Module

Commissioning 59
Manual
Version 1.1.2