Electronics; Removing The Panel Driver - Christie J Series Service Manual

Electronics

Learn how to replace the electronic components and cards in the projector.

Removing the panel driver

Complete the following procedure to remove the panel driver.
Estimated time to replace: 25 minutes
1. Remove the card cage (on page 60).
2. Remove eight standoffs from the input panel.
3. Remove the image processor card.
4. Remove all of the option cards and blank plates from the input panel.
5. Remove the 13 screws securing the panel driver board.
6. Remove the four screws from the corners of the input panel.
J Series Service Guide–2.0, 2.4, and 3.0 kW
020-100739-05 Rev. 1 (02-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
48