3. Replace the rear cover, if required.
4. To re-install, follow these steps in reverse order.
Electronics-side cover
The electronics-side cover provides access to the card cage, rear IOS, and reservoir module.
1. Loosen the four screws securing the electronics-side cover.
2. Remove the electronics-side cover.
3. Replace the electronics-side cover, if required.
4. To re-install, follow these steps in reverse order.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-06 Rev. 1 (08-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Projector covers and feet
40