1. Manuals
  2. Brands
  3. Christie Manuals
  4. Projector
  5. J Series
  6. User manual

Christie J Series User Manual

J series 1000w & 1200w projector
Hide thumbs Also See for J Series:
Table of Contents

Advertisement

Quick Links

Download this manual
J Series
1000W & 1200W
U s e r M a n u a l
020-100706-02

Advertisement

Table of Contents
loading

Related Manuals for Christie J Series

Summary of Contents for Christie J Series

  • Page 1 J Series 1000W & 1200W U s e r M a n u a l 020-100706-02...
  • Page 3 J Series 1000W & 1200W U s e r M a n u a l 020-100706-02...
  • Page 4 Projector lamps (See the separate Christie lamp program policy). c. Damage caused by use of a projector lamp beyond the recommended lamp life, or use of a lamp supplied by a supplier other than Christie. d. Problems caused by combination of the product with non-Christie equipment, such as distribution systems, cameras, video tape recorders, etc., or use of the product with any non-Christie interface device.

  • Page 5: Table Of Contents

    3.8.2 OUTPUT OPTIONS - Submenu ..................3-32 3.8.3 LENS SETTINGS - Submenu .....................3-33 3.8.4 POWER MANAGEMENT - Submenu ................3-34 3.8.5 DATE & TIME - Submenu ....................3-34 3.8.6 MENU PREFERENCES - Submenu...................3-34 3.8.7 COMMUNICATIONS - Submenu..................3-36 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 6 6.2 Lamp ............................6-1 6.2.1 Lamp Does Not Ignite......................6-1 6.2.2 Lamp Suddenly Turns OFF....................6-2 6.2.3 Flicker, Shadows Or Dimness....................6-2 6.3 LCD .............................6-2 6.3.1 Blank Screen, No Menu Displaying ..................6-2 6.4 Remote Keypad..........................6-2 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 7 7.2.2 Air Filters (Optional) ......................7-3 7.2.3 Dust Sealing.........................7-3 7.2.4 ILS (Intelligent Lens System)....................7-3 7.2.5 Projection Lens Compatibility .....................7-4 7.2.6 Automatic Fans ........................7-4 7.2.7 Constant Lamp Output Management...................7-4 7.2.8 Shutter ..........................7-5 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 8 7.10 Accessories and Service Components ..................7-12 7.11 Regulatory..........................7-12 7.11.1 Safety ..........................7-12 7.11.2 Electro-Magnetic Compatibility ..................7-13 7.11.3 Environmental ........................7-13 7.11.4 Marking ..........................7-13 A: Menu Tree A.1 J Series Menu Tree........................A-1 B: GPIO B.1 GPIO Port............................B-1 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 9 Table of Contents C: DMX / ArtNet C.1 DMX and Real Time Events.......................C-1 C.1.1 DMX Channel Setup ......................C-2 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 11: Labels And Marking

    “NOTICE”. Purchase Record and Service Contacts Whether the projector is under warranty or the warranty has expired, Christie’s highly trained and extensive factory and dealer service network is always available to quickly diagnose and correct projector malfunctions. Complete service manuals and updates are available for all projectors. Should a problem be encountered with any part of the projector, contact your dealer.

  • Page 12: Projector Overview

    Projector Mgmt IP Address: Subnet Mask: Projector Overview The J Series is a family of high resolution video/graphics 3 chip 1080p HD, SXGA+, and WUXGA projectors; Table 1.3 J Series Projectors. These projectors are based on DLP® technology provided by Texas Instruments.

  • Page 13: Key Features

    Refer to Section 7 Specifications for a complete list of technical specifications. Table 1.3 J Series Projectors Model Name Part Number DS+8K-J 132-004105-XX HD7K-J 132-005106-XX DS+10K-J 132-007108-XX HD9K-J 132-008109-XX J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 14: Safety Warnings And Guidelines

    Position all cables where they cannot contact hot surfaces or be pulled or tripped over. WARNING All installation and maintenance procedures must be performed by a Christie accredited service technician. WARNING Projector must be operated in an environment that meets operating specifications, as...

  • Page 15: Ac /Power Precautions

    This provides sufficient time for the lamp cooling fans to properly cool the lamp. For all other precautions critical for safe removal and replacement of the lamp, refer to 5.1.1 Lamp and Filter Replacement J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 17: 2: Installation And Setup

    Remove the rear lens cap from the lens. Keep the front lens cap on the lens to protect it during installation. 1. Rotate the lens clamp to the OPEN position, see Figure 2-1. IGURE J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 18 See Figure 2-3 IGURE 4. Remove the front lens cap. 5. For added stability such as motion applications, fasten the security screws provided with the lens-mount. Figure 2-4. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 19 DVI-I connector or an analog video signal to the VGA connector. The DVI signal may contain HDCP (High-Bandwidth Digital Content Protection). • Twin HDMI Input Card: connect HDMI (High-Definition Multimedia Interface) cable to one of the two inputs, 1-IN or 2-IN. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 20 (zoom, focus, horizontal, and vertical) by moving them through their full range of motion. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 21: Detailed Setup And Installation

    An LCD display is located above the keypad for displaying projector status. AC Receptacle The AC receptacle is located at the back of the projector. Use this receptacle to plug in an appropriately rated line cord. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 22 The lamp door is located at the rear of the projector to provide easy access to the lamp module for replacement. Refer to 5.1.1 Lamp and Filter Replacement. The lamp door is fitted with a safety interlock which switches the lamp off when the door is opened. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 23 • Lens Offset – The motorized lens mount allows vertical and horizontal offset of the displayed image. • Shutter – Standard on all models, the shutter allows you to turn the screen absolutely black when in the “Closed” state. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 24: Installation Considerations

    • Usually good ambient light rejection. • Installation cost is usually higher. • Requires less space behind screen than other rear • More involved to perform setup. screen installations. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 25 This reduces it in other areas. A viewing cone, similar to that of a curved front screen installation is created. This type of screen is better suited for brightly lit rooms where the audience is situated within the viewing cone. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 26: Projector Position And Mounting

    The result determines approximately the distance the projector should be positioned from the screen to project a focused image large enough to fill the screen. For example, using a 0.73:1 lens, throw distance would roughly be 0.73 x screen width. 2-10 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 27 Use the lens and screen size to calculate the precise throw distance using the tables provided in the Dealer Section of the Christie Website, PN 020-100221-XX. Due to lens manufacturing tolerances for lens focal length, actual throw distance can vary 5% between lenses with the ±...
  • Page 28 ALL OTHER LENSES ±100% ±525 pixels NOTES: 1) Offsets are subject to ±7% centering tolerance. % Offset = # of pixels of offset/half vertical panel resolution x 100. 2-12 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 29 Section 2: Installation and Setup 2-11 IGURE J Series 1000W and 1200W User Manual 2-13 020-100706-02 Rev. 1 (03-2014)
  • Page 30 ALL OTHER LENSES ±50% ±350 pixels NOTES: 1) Offsets are subject to ±7% centering tolerance. % Offset = # of pixels of offset/half horizontal panel resolution x 100. 2-14 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 31 Section 2: Installation and Setup 2-12 IGURE J Series 1000W and 1200W User Manual 2-15 020-100706-02 Rev. 1 (03-2014)

  • Page 32: Mounting

    100001-XX. This mounting is recommended for those that want the projector out of plain view or have limited amount of space for the projector. For more information, contact your dealer. WARNING Use only the Christie approved ceiling mount kit designed for your projector. Refer to the installation instructions and safety guidelines provided in the kit. Special Mounting The projector can also be rotated (front-to-back) up to 360 degrees and fixed in a rotated position without affecting performance.
  • Page 33 . The position of the projector and mirror must be accurately set - if considering this type of installation call your dealer for assistance. 2-13 F IGURE OLDED PTICAL J Series 1000W and 1200W User Manual 2-17 020-100706-02 Rev. 1 (03-2014)

  • Page 34: Advanced Optical Alignment

    2.2.7 Advanced Optical Alignment Boresight Alignment Procedure for CT Lens Mount To adjust the boresight on a J Series projector equipped with a CT lens mount, see the Boresight Adjustment Procedure instruction sheet found on the Christie website P/N: 013-100141-04.
  • Page 35 2-17. This may require adjusting both setscrews and cap screws. 10. If further action is required. Repeat #2. 11. Lock the setscrews, and re-check the boresight quality. Tighten the setscrew enough to ensure they will not shift. J Series 1000W and 1200W User Manual 2-19 020-100706-02 Rev. 1 (03-2014)

  • Page 36: Powering Down

    Web User Interface (UI) 1. From the Main Tab, Select Power>OFF. NOTE: A window will display for confirmation on powering down, see Figure 2-18. 2. Select Yes. 2-20 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 37: Connecting Communications

    20. RS-422 is better suited than RS-232 for serial communication over distances greater than 50 feet. WARNING Use the RS-422 port only if your device had RS-422 capability - always consult the literature provided with your equipment before connecting J Series 1000W and 1200W User Manual 2-21 020-100706-02 Rev. 1 (03-2014)
  • Page 38 Refer to Section 3 Operation for further information about setting up and using a projector connected via Ethernet, and the Serial Command document provided in the Dealer Section of the Christie Website, PN 020- 100224-XX. Connecting Multiple Projectors To connect multiple projectors in a network with serial communication: RS-232 NETWORK: 1.
  • Page 39 Network Routing to “RS-232 and RS-422 Joined”. NOTES: 1) Connect only properly wired serial communication cables. Each RS-232 communication cable should be no more than 50 feet in length. Use high quality cables. J Series 1000W and 1200W User Manual 2-23 020-100706-02 Rev. 1 (03-2014)
  • Page 40 “RS-232 and RS-422 Joined” or “All Joined”. 2-24 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 41 I/O devices. Refer to Appendix B: for complete details on pin configuration and how to program the GPIO. 2-25 I IGURE NPUT ANEL J Series 1000W and 1200W User Manual 2-25 020-100706-02 Rev. 1 (03-2014)

  • Page 42: Projector Communications

    • The Web page shows a warning that the Image processor card is upgrading. When this occurs, the projector should not be AC power cycled and the Image Processor card should not be removed. 2-26 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 43: Connecting Sources

    The LEDs to the right side of the corresponding connectors indicate that a valid signal is detected. In the case of the output, the LED indicates a signal is currently being looped out. J Series 1000W and 1200W User Manual 2-27 020-100706-02 Rev. 1 (03-2014)
  • Page 44 With a suitable HDMI-to-DVI adaptor, HDMI signals can be input to this card, except the audio will be lost. 2-28 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 45 The green Power LED which is on when the card is powered, and the green Termination LED which is on when termination is enabled. J Series 1000W and 1200W User Manual 2-29 020-100706-02 Rev. 1 (03-2014)
  • Page 46 The LEDs on the right side of the corresponding connectors indicate a valid signal is detected. In the case of the output, the LED indicates a signal is currently being looped out. 2-30 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 47 2-26 U IGURE SE OF ISTRIBUTION Christie loop-through may be used to set up a tiling array (see Figure 2-26 Figure 2-31). The system allows wiring providing the HDCP requirement is met when HDCP is used by the source. The cascade level of devices can be no more than 7 levels deep.
  • Page 48 Section 2: Installation and Setup 2-27 1 IGURE IRING OLUTION 2-28 2 IGURE IRING OLUTION 2-29 2 IGURE THROUGH WIRING SOLUTION 2-32 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 49 Section 2: Installation and Setup 2-30 2 IGURE INGLE WIRING LOOP THROUGH NO PIP IS SUPPORTED 2-31 3 IGURE THROUGH WIRING SOLUTION J Series 1000W and 1200W User Manual 2-33 020-100706-02 Rev. 1 (03-2014)

  • Page 51: Operating The Projector

    3 Operation This section describes the controls and switches used for basic projector operation once it is properly installed, aligned and configured by a Christie accredited service technician. WARNING Section 5 Maintenance. Refer to Safety Warnings and Guidelines in Operating the Projector Control the projector using one of the following options: •...
  • Page 52 Section 3: Operation Remote Keypad 3-1 R IGURE EMOTE EYPAD J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 53 • Off, the key is disabled in the current context • Power Key, used to switch from Standby mode to ON, and from ON to Standby mode; LED always remains Amber J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 54: Remote Keypad Commands

    • Wide range video images should have content (including white) that extends to all edges of the image. Refer to Section 3.5 Adjusting the Image for further details about the Auto Setup function. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 55 The nominal setting for Gamma Correction of 0 is correct for most signals and conditions. If excess ambient light washes out the image and it becomes difficult or impossible to see details in dark areas, increase the gamma correction setting to compensate. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 56 Press F followed by the L or R RROW IGHT RROW insert or delete a character. Press F followed by E NTER to delete all characters. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 57 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 58: Navigating The Menus

    When finished with a function menu: • Press E to return to the previous screen. • Press M to leave the menu system and return to the presentation. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 59 “Direct” slide bars - For quick access, to Gamma, Brightness, and Contrast slide bars without traveling the menu system. Press Gamma, Brightness, or Contrast to display the contrast slide bar. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 60 NOTES: 1) or R Press E RROW IGHT RROW to jump between pages in an extra long pull-down list. while in a pull-down list to cancel any change. 3-10 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 61 The channel numbers are defined with two digits—for example, if you enter only a single digit (such as “7”) for a channel number, the channel will automatically be defined as “07”. J Series 1000W and 1200W User Manual 3-11...

  • Page 62: Using Inputs And Channels

    2. Press the appropriate direct SLOT key to quickly display one of the inputs on the selected slot to the main image. This will not bring up any menu selection, and is only applicable for the main image. 3-12 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 63 Signal Channel# Horizontal Vertical parameter for the channel has been changed. Type Frequency Frequency Slot i-Interlaced Input p-Progressive 3-12 U IGURE SING A HANNEL J Series 1000W and 1200W User Manual 3-13 020-100706-02 Rev. 1 (03-2014)

  • Page 64: Channel Setup Menu

    Table 3.1 - Abbreviations for Signal Type. Composite Sync on the H/C input or the V input (4- wire). These abbreviations are preceded by either an ‘i’ (interlaced signals) or ‘p’ (progressive signal). 3-14 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 65 Channel Setup Delete Unlocked Only Delete All Channels iSVid 15.73kHz- i59.94-Hz- pDig 33.72kHz+ p29.07-Hz+ iSVid 15.73kHz- i59.94-Hz- New Channel identical to Chan #1. 3-14 C IGURE OPY A HANNEL J Series 1000W and 1200W User Manual 3-15 020-100706-02 Rev. 1 (03-2014)
  • Page 66 Interlaced S-Video Sync Source Name i59.94Hz- 15.73kHz- Channel Slot Input In Menu Auto Select Locked Previous Channel Next Channel 3-16 C IGURE HANNEL CHANNEL EDIT — STEP 3 3-16 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 67: Adjusting The Image

    (available for certain display parameters only). For example, press C to access the “contrast” slide bar immediately. Press E ONTRAST to return to J Series 1000W and 1200W User Manual 3-17 020-100706-02 Rev. 1 (03-2014)

  • Page 68: Size And Position Menu

    The same resize presets are available to all HD and SXGA+ screen models. However, the graphics used to describe each preset in this section are of the SXGA+ models only. 3-18 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 69 For example, for a source with a native resolution of 800 x 600, “No Resizing” in an SXGA+ projector will use the central 800 x 600 pixels and have a black border—the black border areas are unused areas, see below. 3-20 N IGURE ESIZING J Series 1000W and 1200W User Manual 3-19 020-100706-02 Rev. 1 (03-2014)
  • Page 70 Proper pixel tracking ensures that the image quality is consistent across the screen, the aspect ratio is maintained, and that the pixel phase can be optimized (described below). Tracking determines the frequency of 3-20 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 71 “Blank” settings. For example, if you have blanked (cropped) 100 pixels from both the left and right edges of an incoming source of 1400 x 1050, the remaining active input window will be reduced to 1200 x 1050. J Series 1000W and 1200W User Manual 3-21 020-100706-02 Rev. 1 (03-2014)

  • Page 72: Image Settings Menu

    NOTE: If the environment lighting changes, an adjustment of Gamma is recommended (see below). 3-22 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 73 AGC circuit to ensure properly bright images. Delete the checkmark if a decoded video image exhibits strange color artifacts such as stripes in highly saturated colors, indicating an incompatibility between this source and the AGC. J Series 1000W and 1200W User Manual 3-23 020-100706-02 Rev. 1 (03-2014)
  • Page 74 “noisy” video signal, or if a graphics signal appears overly “soft”. Both instances indicate that “Filter” may be set to the wrong option. 3-24 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 75 CE products that use the limited space. This adjusts what is considered black and white levels in the image. As an example for 8 bit space, full range RGB uses levels 0(black) to 255(white). J Series 1000W and 1200W User Manual 3-25 020-100706-02 Rev. 1 (03-2014)
  • Page 76 3. Confirm that you are using input on an Analog BNC card or a Dual Link DVI card. Input Levels are not applicable for sources going through the decoder. A greyscale is recommended. 3-26 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 77 (or colored) band, the input levels for this source are correctly set. Upon exiting the Input Levels menu, the Peak Detector check box will clear. J Series 1000W and 1200W User Manual 3-27 020-100706-02 Rev. 1 (03-2014)
  • Page 78 Select the base gamma table for a given source. Select from one of the standard tables, a custom gamma function, or select an arbitrary gamma table that has been downloaded to the projector. NOTE: A separate PC utility is needed to do this. 3-28 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 79 Changing inputs, channels or test patterns will disable this control. NOTE: PIP and Tiling operation must be disabled prior to enabling this control. J Series 1000W and 1200W User Manual 3-29 020-100706-02 Rev. 1 (03-2014)
  • Page 80 SD Video and HD Video - Sets the output color to a specific standard value. Adjusts the colors; red, green, blue, and white. User# - Select 1 of 4 user defined sets of color adjustments; defined in the Configuration menu. 3-30 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 81 Open/Close, and Lock and Unlock dial positions. NOTE: The lock/unlock dial position allows you to open the aperture at a desired position and lock it in place. 3-30 A IGURE PERTURE ANUAL DJUSTMENT J Series 1000W and 1200W User Manual 3-31 020-100706-02 Rev. 1 (03-2014)

  • Page 82: Configuration - Adjusting System Parameters And Advanced Controls

    Dynamically calculated by the software as the achievable range being smaller than the set range. The image parameters include, image shift, scaling, warp/keystone applied and format. The menu displays both the user 3-32 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 83: Lens Settings - Submenu

    NOTE: The OSD only allows the fade time to be set. To initiate a Fade to Black, the Christie Serial command should be used. • HDMI OUTPUT LOOP SOURCE This control is used to configure the HDMI output options. Selecting Direct Loop will directly pass-through the HDMI input signals: on the same Twin HDMI Input Card, the Input1 signal is looped to Output1 and the Input2 signal is looped to Output2.

  • Page 84: Power Management - Submenu

    Adjust the appearance, content and/or location of on-screen menus and messages. • LARGE MENU FONT Enter a checkmark to enlarge menus and their text. To adjust Menu Location to accommodate the increased menu area. 3-34 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 85 • Start-up And No Signal – A splash screen appears at start-up and at any time when there is no signal. To add your own splash screen in addition to the default “Christie logo” splash screen, use the Web UI to download the desired bitmap (.bmp) file to the projector.

  • Page 86: Communications - Submenu

    3.8.7 COMMUNICATIONS - Submenu Defines and controls how single or multiple projectors are linked with each other and with a controlling device. For detailed information refer to the Serial Command document provided in the Dealer Section of the Christie Website, PN 020-100224-XX.
  • Page 87 Use Broadcast Keys to relay all key presses received by the projector to all other projectors on the network. FRONT IR ENABLED Enable or disable the IR sensor on the front of the projector. J Series 1000W and 1200W User Manual 3-37 020-100706-02 Rev. 1 (03-2014)
  • Page 88 • If this sequence of 3 values is not sent to the projector, the command is ignored Refer to Appendix C: DMX / ArtNet for the DMX Channel Allocation 3-38 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 89 DMX input. • HOST NAME This will be used to respond to ArtNet polling queries. "Christie" will be the short name, "Christie_HostName" will be our long name. By default the host name is composed from the projector name and serial number.

  • Page 90: Geometry And Color - Submenu

    The outside edge of a cursor will be the outside edge of the image. It may not be possible to exactly match the screen dimensions with the Horizontal and Vertical Keystone controls, but these settings can be refined when the 2D keystone settings are adjusted. 3-40 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 91 Coarse Adjustment check box to apply Brightness Uniformity settings with a large granularity. Coarse Adjustment helps identify brightness changes and accelerates projector response time while adjusting settings. To disable the Brightness Uniformity function, delete the Brightness Uniformity Enable checkmark. J Series 1000W and 1200W User Manual 3-41 020-100706-02 Rev. 1 (03-2014)
  • Page 92 White Uniformity menu their values will reach “0” first, causing the slide bar to stop earlier than expected.  JUDGE BY EYE OR USE A METER— Good brightness uniformity can be achieved with either. 3-42 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 93 (note that each corner is adjustable in either of its two adjacent “side” menus). When done, all areas of a given screen should match. Repeat Steps 2a & 2b for all remaining screens. J Series 1000W and 1200W User Manual 3-43...
  • Page 94 By controlling blend width and other properties, you can achieve uniformity across the group of images. Visible overlaps will disappear, Figure 3-37 Edge Blending Concept: 3-36 E IGURE LENDING 3-44 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 95 Toggle the Show Blending Overlap off to reactivate the blend effect. NOTE: Blending Overlap appears as Reserved when Christie TWIST is installed. Other Functions For convenience, the Edge Blending submenu also includes related options for enabling a specific color and/ or test pattern, or for working with colors or the lamp.
  • Page 96 Use the following as a guide (examples show overlapping width only—values for overlapping height will differ). NOTE: Recommended overlap is 12.5% - 25%. 3-46 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 97 Adjust the slide bars or enter new specific coordinates as desired to define or change up to four “User” color gamuts needed for your environment and applications. Apply at any time in the Advanced Image Settings menu. J Series 1000W and 1200W User Manual 3-47 020-100706-02 Rev. 1 (03-2014)
  • Page 98 Similar to Edge Blending, Black Level Blending allows you to adjust the black level intensity of multiple adjacent projected images to create one large seamless display. Blinders are recommended for fixed installations. 3-48 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 99  The relative location of the projector within the array - set the row number and column number for each projector  Enable Tiling - Tiling can be enabled or disabled without losing any of the above settings. J Series 1000W and 1200W User Manual 3-49 020-100706-02 Rev. 1 (03-2014)

  • Page 100: Diagnostics & Calibration - Submenu

    HINT: When the FUNC+HELP key combination is pressed, the tiling settings will be cleared. NOTE: Tiled warps/keystones can be enabled through Christie TWIST 1.6; Refer to the Christie TWIST User Manual. 3.8.9 DIAGNOSTICS & CALIBRATION - Submenu • TEST PATTERN Select the desired internal test pattern to display, or select OFF to turn off a test pattern.

  • Page 101: Service - Submenu

    Both Constant Intensity and Constant Power modes extend lamp life. NOTES: 1) Constant Intensity mode, use the Intensity slidebar to adjust brightness. Constant Intensity mode cannot operate correctly if the LiteLoc calibration has not been performed. J Series 1000W and 1200W User Manual 3-51 020-100706-02 Rev. 1 (03-2014)
  • Page 102 The current lamp appears at the bottom of the list. This entry is added automatically when you record a new serial number during the lamp change process. See CHANGE LAMP - Submenu. 3-52 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 103: Main Input

    • PIP H-POSITION Sets the center position of the Picture-In-Picture window on the screen. • PIP V-POSITION Sets the center position of the Picture-In-Picture window on the screen. J Series 1000W and 1200W User Manual 3-53 020-100706-02 Rev. 1 (03-2014)
  • Page 104 The Main video signal is looped to Output1 and the Secondary video signal is looped to Output2. Select Disable to shut off the HDMI outputs completely. 3-54 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 105: Status

    To access the Service menu (password-protected) return to the factory-set color primaries. Select the “Reset to Factory Defaults?” option in the Color Primaries submenu. Then repeat the calibration process describe above and continue with matching of colors. J Series 1000W and 1200W User Manual 3-55 020-100706-02 Rev. 1 (03-2014)

  • Page 106: Color Adjustment Procedure

    Color Enable Color Enable Color Enable Copy From Max Drives Copy From Max Drives Copy From Max Drives 3-40 J X/Y V IGURE OWN A ET OF RIVES ALUES 3-56 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 107 6. All screens should now be color-matched. Apply this new “User” gamut to a source at any time by selecting it in the “Select Color Adjustment” list accessed in the Advanced Image Settings menu. J Series 1000W and 1200W User Manual 3-57...

  • Page 108: Remote Control Of The Projector

    VIA ASCII MESSAGING — Connect a serial link between your controller and the RS-232 or RS-422 port (recommended), or open an Ethernet socket (i.e., Telnet) between your controller and the valid projector address. Valid ASCII codes and messages are documented in the Christie Serial Communications document available at the Christie website.

  • Page 109: Alarms

    When an alarm is displayed on the LCD, the built-in keypad is disabled. Press the OK soft key to re-enable the built-in keypad. When the status of the alarm item is within normal range, the alarm will clear. J Series 1000W and 1200W User Manual 3-59 020-100706-02 Rev. 1 (03-2014)

  • Page 111: 4: Web User Interface

    Both entries are case-sensitive. 4-1 L 4-2 L IGURE ANGUAGE DROP DOWN LIST IGURE OGIN 4. Click the Login button. The Main window (see Figure 4-3) appears. 4-3 M IGURE AIN WINDOW J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 03-2014...

  • Page 112: Navigating The Web User Interface

    See Figure 4-4. To disable this feature, go to Admin>System>Tooltip: Hide. NOTE: Help text is 4-4 H IGURE OUSE XAMPLE not available for a disabled button. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 03-2014...

  • Page 113: Basic Operation

    • Green = Good • Yellow = Warning • Red = Error For more information about each LED, click a category for details. 4-5 C IGURE ATEGORY TATUS XAMPLE J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03/2014)

  • Page 114: Main Tabbed Page - Lens

    MANUFACTURE DEFAULT SET ENABLED DEPENDING ON THE CUR TINGS REFER TO ECTION OSD. C RENT STATE OF THE PERATION FOR MORE DETAILS TROL OF THE IS ALWAYS AVAILABLE THROUGH THE REMOTE J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 03-2014...
  • Page 115 If you click the menu option, the field cannot be edited. 3. Edit the field entry. 4. Press Enter to save your changes. Numeric field selected Menu option selected 4-8 S IGURE ELECT UMERIC IELD J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03/2014)

  • Page 116: Admin Tabbed Page - System

    Under the Admin tabbed page, select the System secondary tab to upgrade, upload, backup and restore specific files, change the Logo position, background color, gamma properties, and select the interrogation level. 4-10 A IGURE DMIN INDOW J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 03-2014...
  • Page 117 OK. The color square changes to the selected color. c. Click the Upload button to display the Logo Upload window. Click Yes or No to confirm or cancel the upload. An Upload in Progress window appears. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03/2014)

  • Page 118: Admin Tabbed Page- Users

    If capitalization is used for the username or password, it will automatically convert it to lower case. Usernames can be a minimum of 4 and maximum of 32 characters. passwords can be a minimum of 4 and maximum of 128 characters. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 03-2014...

  • Page 119: Advanced Tabbed Page - Rte

    • Copy, clone an existing event • Stop, discontinue the event running • GPIO Setup, used to configure the GPIO pins as inputs/outputs and to set the current state of the output pins J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03/2014)
  • Page 120 : Serial Representation box is read only. • Click the Help button for a description of special RTE commands available for adding loops and delays to the command sequence. 4-10 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 03-2014...
  • Page 121 (i.e. Input Change > Input 1, Slot 1). See Figure 4-18 Add System Event. 4-18 A IGURE YSTEM VENT J Series 1000W and 1200W User Manual 4-11 020-100706-02 Rev. 1 (03/2014)
  • Page 122 3. Select a DMX channel (DMX-56 to DMX-61) from the drop-down list as shown in Figure. Refer to Section 3: Operation for detailed information. 4-21 DMX C IGURE HANNEL VENT 4-12 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 03-2014...

  • Page 123: About Tabbed Page

    Provides information about the projector software version, model, serial number, and license information. 4-22 A IGURE ERIAL OMMAND NOTE: The information provided on the Version and License tabs are read-only. J Series 1000W and 1200W User Manual 4-13 020-100706-02 Rev. 1 (03/2014)

  • Page 125: Projector Location

    “hotspot,” which could potentially result in lamp failure. It is recommended you wear a face shield when working with the lamp. For this procedure you will need the appropriate Lamp and Filter Kit manufactured by Christie Digital Systems. See Table 5.1.
  • Page 126 Using a #2 Phillips screwdriver, loosen the two (2) lock screws securing the lamp door, which is located at the rear of the projector below the Input panel. See Figure 5-1. IGURE J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 127 Align the new lamp with the top and bottom guides on the left side of the lamp compartment. See Figure 5-4. Slide the lamp into the terminal block. NOTE: A slightly harder push may be required to ensure it is fully seated. IGURE J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 128 If this filter is not replaced, airflow may become restricted and cause the projector to overheat.Use the filter provided in the Christie approved Lamp and Filter Kit for your specific projector model. See Table 5.1. 1. TURN OFF THE PROJECTOR, COOL AND UNPLUG Before removing or installing a filter, turn off the projector and allow it to cool for 5 minutes before unplugging.

  • Page 129: Replacing The Projection Lens

    Fully insert the assembly straight into the lens mount opening without turning. Press using your hand as shown in Figure 5-7. NOTE: Ensure the lens is not inserted at an angle, as this can cause damage. LARGE LENS CAP J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 130 MUST be installed when hoisting the projector overhead, or installing the projector in an overhead position. WARNING Use of the lens red security screws or the lens retaining screws is required if the projector is hoisted or installed in an overhead position. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 131: Cleaning The Lens

    Refer to 7 Specifications • Only use attachments or accessories recommended by Christie, such as the specific power cord supplied. Use of other attachments or accessories with this projector may result in the risk of fire, shock or personal injury.

  • Page 132: Ventilation

    • The projector has been exposed to excessive moisture • The projector does not operate normally • The projector has been dropped or the case has been damaged • Projector performance has deteriorated J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 133: Power

    2. For suspected communication failures, power-down the projector and try again. 3. If the lamp does not ignite after step 2 above, then replace the lamp. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 134: Lamp Suddenly Turns Off

    6. Using the XLR connector, use the remote as a “wired” keypad. If it does work and all the IR sensors have been enabled, then there may be a problem with the IR sensors. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 135: Osd

    4. Display a test pattern on the screen, pressing the Test button on the remote keypad. The test pattern should be displayed correctly. If not, contact your dealer for assistance. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 136: Image Appears 'Squeezed' Or Vertically Stretched Into Center Of Screen

    6.7.10 Display Quality Appears to Drift from Good to Bad, Bad to Good 1. The source input signal may be of low quality. 2. The H or V frequency of the input may have changed at the source end. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 137: Display Has Suddenly Frozen

    4. If the distance between the input source device and the projector is greater than 25 feet, signal amplifica- tion/conditioning may be required. 5. If the source is a VCR or off-air broadcast, detail may be set too high. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 138: Web Interface

    “File Download” options are enabled, then click OK. Once the Warning window displays, click OK. 4. Using the Internet Option window, select Local intranet, then click Custom Level. Repeat Step 3. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 139 Section 6: Troubleshooting IGURE J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 141: Image Performance

    7 Specifications This section provides detailed J Series features; including inputs, lamp, and power requirements. NOTE: Due to continuing research, detailed features are subject to change without notice. Image Performance 7.1.1 Pixel Format 1080p (H x V square pixels) 1920 x 1080...

  • Page 142: Color Primaries

    (Note: convergence error includes the effects of lateral color in the projection lens. Measurements must be done on horizontal and vertical test pattern lines that intersect the center of the image). J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 143: Blemishes

    Travel time stop to stop Zoom and Focus 10 sec nominal (depends on lens type) Offsets 5 sec (nominal (depends on lens type) Manual Lens Movement Manual over-ride permissible for zoom and focus J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 144: Projection Lens Compatibility

    7.2.7 Constant Lamp Output Management (Factory Optional) Yellow notch filter Fixed filter to enhance color space ™ Automatically adjusts lamp output to maintain LiteLOC constant lumens setting within operating range of the lamp. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 145: Shutter

    6 user inter-changeable – hot swappable Number of processor cards 2 user inter-changeable Number of option slots 4, option cards; 1, processor card Arbitrary Gamma User definable gamma curves J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 146: Image Processor Performance

    YCbCr (4:2:2) YCbCr (4:4:4) HDCP support HDMI 1.3 supported (not including audio) except: 12 bit color dithered to 10 bits; 16 bit color not supported HDMI 1.4a (Mirage Models) J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 147: Dual Link Dvi Input

    7.5.1 Projector Control Number of transmitters 2 IR Modulation frequency Dual frequency (38 kHz) Range Min 35 m Wired Keypad 3 pin XLR connection Max cable length 30 m (not supplied) J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 148: Control Receiver

    Section 7: Specifications 7.5.2 Control Receiver Number of sensors 1 front, 1 rear Coverage 130 degrees coverage in-line with lens at 3 m distance Modulation (carrier) frequency Dual frequency (38 kHz) J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 149: Ethernet

    Two 5-pin XLR one male (input) and one female (output) DMX Chain Termination Configurable via software 7.5.9 Built-In Keypad and Display Key type Soft-touch keys Display type Graphics LCD backlight J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 150: Power Requirements

    Maximum shipping dimensions (L x W x H) 851mm (33.5”) x 762mm (30”) x 660mm (26”) 7.7.2 Adjustment Product Alignment 50mm (2”) of vertical adjustment on 2 front feet. Rear pad is fixed. 7-10 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 151: Weight

    Operating temperature range 5 to 40 degrees C Storage temperature range -40 to 70 degrees C Humidity range 10% to 80%, non condensing Operating Altitude 10,000 ft. maximum J Series 1000W and 1200W User Manual 7-11 020-100706-02 Rev. 1 (03-2014)

  • Page 152: Accessories And Service Components

    Edge Blending CT 104-102101-XX Remote IR Sensor 104-106101-XX Portrait Adapter 118-116109-XX 7.11 Regulatory 7.11.1 Safety • CAN/CSA C22.2 No. 60950-1 • UL 60950-1 • IEC 60950-1 • EN60950 7-12 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)

  • Page 153: Electro-Magnetic Compatibility

    (2003); • United States society of the plastics industry (SPI) resin identification code (1988); • ISO standards on marking of plastics (11469:2000, 1043-1:2001, 1043-2:2000, 1043-3:1996, and 1043- 4:1998). J Series 1000W and 1200W User Manual 7-13 020-100706-02 Rev. 1 (03-2014)

  • Page 155: J Series Menu Tree

    Appendix A: Menu Tree A.1 J Series Menu Tree J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 157 Appendix A: Menu Tree J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (3-2014)
  • Page 158 Appendix A: Menu Tree J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (3-2014)
  • Page 159 Appendix A: Menu Tree J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (3-2014)

  • Page 161: Gpio Port

    Pin 8 GPIO 5 Pin 9 GPIO 7 The serial cable required for connecting the external device to the projector GPIO connector, must be compatible with the external device. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 162 Inputs, pins 6, 7, 8 & 9 are Outputs NOTE: The strings in the commands refer to pins 2, 3, 4, 6, 7, 8, 9 in order from left to right. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 163 Facing Screen 2050 -100 Keep Out Keep Out -2050 -2050 -400 2050 C-1 L IGURE ONTROL IMITATIONS J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 164 Projector 3 (38 ch) Table C.3 “Show personality” Incorrect Example Base Channel All projectors using Show Personality (Incorrect) Projector 1 (18 ch) Projector 2 (18 ch) Projector 3 (18 ch) J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 165 0 to 9 Projector Channel 1 10 to 19 Projector Channel 2 Input Channel 20 to 29 Projector Channel 3 ..180 to 189 Projector Channel 19 190 to 199 Projector Channel 20 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 166 Scaled as % of total control range. minimum Depends on what lamps are Setup Lamp Power ..used, power rating may be dif- Functions mid-range ferent scale..maximum Reserved Reserved for future expansion J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 167 The list of warps depends on Advanced Warp/keystone 40-59 Warp 1 enable the warps having been saved Image enable ..on the projector by the user. 220-239 Warp 10 enable J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 168 Lens position (Coarse) 0 to 255 Scaled as % of total control Locked by channel “lens shift range, which is 0 to 4096 enable”. Lens Vertical Lens position (Fine) J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 169 If you wish to manually Video Black control the fade to black time, 0 Shutter Closed the brightness channel can be 1-255 Shutter Open used to achieve the same effect. J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 170 0 to 255 Scaled as % of total control Image Size range, which is 200 to 4000 0 to 255 Scaled as % of total control Image Vertical Stretch range, which is 200 to 3000 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 171 0 to 255 Scaled as % of total range, Colorimetry Brightness which is 0 to 100 0 to 255 Scaled as % of total range, Colorimetry Contrast which is 0 to 100 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 172 171 EXECUTE projector by the user. Output Color 180-184 Warp/keystone disable 185-189 2D Keystone enable 190-194 Warp 1 enable ..240-244 Warp 11 enable C-10 J Series 1000W and 1200W User Manual 020-100706-02 Rev. 1 (03-2014)
  • Page 173 Real Time 50-59 Triggers RTE 5 Events 60-69 Triggers RTE 6 70-79 Triggers RTE 7 86 LOAD 171 EXECUTE Reserved Reserved for future expansion Reserved Reserved for future expansion J Series 1000W and 1200W User Manual C-11 020-100706-02 Rev. 1 (03-2014)
  • Page 175 *000-102355-03* ASSY TECH DOCS J Series 1000W and 1200W Corporate offi ces Worldwide offi ces USA – Cypress Australia Eastern Europe and India Singapore ph: 714-236-8610 ph: +61 (0) 7 3624 4888 Russian Federation ph: +91 (080) 6708 9999 ph: +65 6877-8737 ph: +36 (0) 1 47 48 100 Canada –...
  • Page 176 For the most current technical documentation, please visit www.christiedigital.com...

This manual is also suitable for:

Ds+8k-jHd7k-jDs+10k-jHd9k-j

Table of Contents