•
For a CT lens mount, remove the five hex screws securing the dust boot to the lens
mount.
3. Loosen the six quick-release screws securing the front cover.
4. Remove the front cover.
5. To install the front cover, follow these steps in reverse order.
Removing the rear cover
Complete the following procedure to remove the rear cover.
Estimated replacement time: 1 minute.
1. Loosen the two quick-release screws securing the lamp door.
2. Loosen the five quick-release screws securing the rear cover.
J Series Service Guide–2.0, 2.4, and 3.0 kW
020-100739-05 Rev. 1 (02-2018)
Copyright
2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Projector covers
37