Projector covers
Learn how to remove the covers of the projector.
Removing the top cover
Eight screws hold the top cover in place.
Estimated time to replace: 1 minute.
1. If installed, remove the three stacking mounts (on page 41).
2. Loosen the eight quick-release screws securing the top cover.
3. Remove the top cover.
4. To install the top cover, follow these steps in reverse order.
Removing the front cover
Complete the following procedure to remove the front cover.
Estimated time to replace: 2 minutes.
1. Remove the lens.
2. Release the dust boot from the lens mount.
•
For an ILS lens mount, remove the six hex screws securing the dust boot to the lens
mount.
J Series Service Guide–2.0, 2.4, and 3.0 kW
020-100739-05 Rev. 1 (02-2018)
Copyright
2018 Christie Digital Systems USA, Inc. All rights reserved.
©
36