Optics
Learn how to replace lamps, mirrors, and other optical components.
Replacing the lamp module
Complete the following procedure to replace the lamp module.
Warning! If not avoided, the following could result in death or serious injury.
•
EXPLOSION HAZARD! Allow sufficient time for the lamp to cool down before powering down the
product, disconnecting it from AC, and opening the lamp door.
•
EXPLOSION HAZARD! Always wear manufacturer approved protective safety clothing (gloves,
jacket, face shield) whenever the lamp door is open or when handling the lamp. Any local or
federal specifications take precedence over Christie's protective clothing recommendations.
Use one of the following lamp and filter kits during this procedure.
Projector part
number
Roadster S+14K-J
Mirage S+14K-J
Roadster HD14K-J
Mirage HD14K-J
Mirage WU14K-J
Matrix WU14K-J
Roadster S+18K-J
Mirage S+18K-J
Roadster HD16K-J
Mirage HD16K-J
Roadster S+22K-J
Mirage S+22K-J
Roadster HD20K-J
Mirage HD20K-J
Roadster WU20K-J
J Series Service Guide–2.0, 2.4, and 3.0 kW
020-100739-05 Rev. 1 (02-2018)
Copyright
2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Projector model
132-010113-XX
132-010124-XX
132-011114-XX
132-011125-XX
132-012126-XX
132-012137-XX
132-013116-XX
132-013127-XX
132-014117-XX
132-014128-XX
132-016119-XX
132-016120-XX
132-017110-XX
132-017121-XX
132-018111-XX
Lamp type
2.0 kW
2.4 kW
3.0 kW
Lamp/filter kit
required
003-120135-XX
03-900518-XXP
003-000306-XX
63