Keeping Electronics On In Standby Mode; Implementing Stealth Mode; Enabling Direct Pass-Through Of Hdmi, 3G, And Displayport Input Signals; Disabling Secondary Dvi Receivers - Christie Boxer 4K Series User Manual

Keeping electronics on in standby mode

When the projector is placed in standby mode, the light source will be turned off but the electronics
and required fans remain on.
This feature is not available while the projector is cooling down.
1. Select MENU > System Settings > Power Settings.
2. Select Keep Electronics On In Standby.
3. To enable electronics remaining on in standby mode, select Enter.

Implementing Stealth mode

When Stealth mode is enabled, the status and shutter LEDs are turned off and the heartbeat feature
on the display panel Enter key is disabled.
1. Select MENU > System Settings > Power Settings > Stealth Mode.
2. To disable the LEDs and heartbeat feature, select Enter.
3. To enable the LEDs and heartbeat feature, select Stealth Mode again.
Enabling direct pass-through of HDMI, 3G, and
DisplayPort input signals
Allow the signals from HDMI, 3G, and DisplayPort inputs to pass through another projector.
1. Select MENU > Configuration > Input Settings > Enable Video Loop Out.
2. To enable passing HDMI, 3G, and DisplayPort input signals through to another projector, select
Enter.

Disabling secondary DVI receivers

In some cases when using single-link DVI signals, the unused secondary receivers disrupt the signal
detection logic. Disable the secondary receivers if occasional screen flashes are seen while the
projector attempts to re-synchronize to the incoming video.
1. Select MENU > Configuration > Input Settings > Disable Secondary DVI Receiver on
DDIC.
Issuing the (DDD 1) serial command also disables the secondary receivers.
2. To disable the secondary receivers, select Enter.

Informing the source of signal preferences

Configure Boxer 4K to automatically inform the video source of the preferred signal formats.
1. From the display panel, select MENU > Configuration > Input Settings > Advanced EDID
Extensions.
Boxer 4K User Guide–Boxer 4K20 (Bb.4) and Boxer 4K30 (Bb.1)
020-101777-16 Rev. 1 (05-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Configuring system settings
38