Christie J Series Service Manual page 22

2.0, 2.4, and 3.0 kw

Hide thumbs Also See for J Series:

Table of Contents

7. To square the integrator rod to the projector. move the knob up and down.

Make sure that all the shadows at each corner disappear and maintain the best focus on the

shadowed edge while performing this adjustment.

It may not be possible to eliminate all of the shadows from every corner. In this instance,

further adjustment of the fold mirror may be required.

8. Tighten the integrator adjustment knob.

J Series Service Guide–2.0, 2.4, and 3.0 kW

020-100739-05 Rev. 1 (02-2018)

Service setups

Table of Contents