Replacing The Rear Lens Side Bottom Stacking Mount - Christie J Series Service Manual

4. Continue to unscrew the stacking mount until it releases from the projector.
5. To re-install, follow these steps in reverse order.
Replacing the rear lens side bottom stacking
mount
Complete the following procedure to replace the rear lens side stacking mount on the bottom of the
projector.
Estimated time to replace: 7 minutes.
1. Release the two self-retaining screws on the lamp door.
2. Open the lamp door.
3. Remove the locking screw from the stacking mount bolt.
4. Unscrew the stacking mount until it releases from the projector.
5. To re-install, follow these steps in reverse order.
J Series Service Guide–2.0, 2.4, and 3.0 kW
020-100739-05 Rev. 1 (02-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Stacking mounts
42