Christie J Series Service Manual page 86
2.0, 2.4, and 3.0 kw
Hide thumbs
Also See for J Series:
- User manual (176 pages) ,
- Service manual (77 pages) ,
- Setup manual (60 pages)
Table of Contents
Advertisement
3. Remove the two top screws securing the liteLOC assembly to the optical assembly.
4. Loosen the bottom center screw.
5. Remove the LiteLOC assembly.
6. To re-install, complete these steps in reverse order.
J Series Service Guide–2.0, 2.4, and 3.0 kW
020-100739-05 Rev. 1 (02-2018)
Copyright
2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Optics
86
Advertisement
Table of Contents
