Projector part
number
Mirage WU20K-J
Matrix WU20K-J
Estimated time to replace: 2 minutes
1. Turn the lamp and projector off.
2. Allow the projector to cool for a minimum of 5 minutes.
3. Unplug the projector.
4. Put on protective clothing and a face shield.
5. Loosen the two quick-release screws securing the lamp door.
6. Loosen the screw holding the lamp module handle.
7. Pull the lamp module handle outward to remove the lamp.
8. Remove the lamp module.
J Series Service Guide–2.0, 2.4, and 3.0 kW
020-100739-05 Rev. 1 (02-2018)
Copyright
2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Projector model
132-018122-XX
132-018133-XX
Lamp type
Optics
Lamp/filter kit
required
64