1. Manuals
  2. Brands
  3. Christie Manuals
  4. Projector
  5. J Series
  6. User manual

Christie J Series User Manual

J series
Hide thumbs Also See for J Series:
Table of Contents

Advertisement

Quick Links

Download this manual
J Series
2.0, 2.4 and 3.0 kW
U s e r M a n u a l
020-100707-03

Advertisement

Table of Contents
loading

Related Manuals for Christie J Series

Summary of Contents for Christie J Series

  • Page 1 J Series 2.0, 2.4 and 3.0 kW U s e r M a n u a l 020-100707-03...
  • Page 3 J Series 2.0, 2.4 and 3.0 kW U s e r M a n u a l 020-100707-03...
  • Page 4 Projector lamps (See the separate Christie lamp program policy). c. Damage caused by use of a projector lamp beyond the recommended lamp life, or use of a lamp supplied by a supplier other than Christie. d. Problems caused by combination of the product with non-Christie equipment, such as distribution systems, cameras, video tape recorders, etc., or use of the product with any non-Christie interface device.

  • Page 5: Table Of Contents

    2.4.3 Hoisting Procedure ......................2-16 2.4.4 Stacking Procedure ......................2-16 2.4.5 Alignment Procedure ......................2-19 2.4.6 Mounting..........................2-20 2.4.7 Adjusting Projector Height/Tilt ...................2-20 2.4.8 Basic Optical Alignment......................2-21 2.4.9 Advanced Optical Alignment ....................2-22 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 6 3.3.1 How to Select an Input Or a Channel ..................3-13 3.3.2 Create a New Channel......................3-14 3.3.3 Using A Channel ........................3-14 3.3.4 Channel Setup Menu......................3-15 3.4 Adjusting the Image........................3-18 3.5 Size and Position Menu .......................3-19 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 7 3.9.19 Black Level Blending - Submenu..................3-47 3.9.20 Default Color Adjustments and Default Color Adjustment with YNF ......3-47 3.9.21 Tiling Setup - Submenu .....................3-47 3.9.22 Diagnostics And Calibration - Submenu ................3-48 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 8 4.2.6 Tools Tabbed Page - Virtual OSD ..................4-4 4.2.7 Admin Tabbed Page - System....................4-6 4.2.8 Admin Tabbed Page - Users ....................4-8 4.2.9 Advanced Tabbed Page - RTE.....................4-9 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 9 6.7.10 Display Quality Appears to Drift from Good to Bad, Bad to Good ........6-4 6.7.11 Display Suddenly Freezes....................6-4 6.7.12 Colors in the Display are Inaccurate..................6-5 6.7.13 Display is Not Rectangular ....................6-5 6.7.14 Display is “Noisy” ......................6-5 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 10 7.5.3 RS-232 ..........................7-8 7.5.4 RS-422 ..........................7-8 7.5.5 Ethernet ..........................7-8 7.5.6 USB 2.0 Device Port ......................7-8 7.5.7 GPIO ............................7-9 7.5.8 DMX512 Interface .......................7-9 7.5.9 Built-In Keypad and Display ....................7-9 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 11 B.1.3 Lens Control Limitations ....................B-1 B.2 DMX Channel Setup........................B-2 B.2.1 J Series Setup Personality ....................B-3 B.2.2 J Series Show Personality ....................B-6 B.2.3 J Series Nitro VIP Projector Yoke Personality ..............B-8 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 13: Labels And Marking

    1) assemble/install the projector and 2) perform service functions inside the projector. DISCLAIMER: Christie Digital Systems assumes no responsibility for omissions or inaccuracies. Updates to this document are published regularly, as required. Please contact Christie Digital Systems for availability. Labels and Marking Observe and follow any warnings and instructions marked on the projector.

  • Page 14: Purchase Record And Service Contacts

    Subnet Mask: Projector Overview The J Series is a family of high resolution video/graphics 3 chip 1080p HD, SXGA+, WUXGA and WXGA projectors, see Table 1.2 J Series Projectors for specific models. These projectors are based on next generation DLP™ technology provided by Texas Instruments.

  • Page 15: List Of Components

    Table 1.2 J Series Projectors MODEL NAME PART NUMBER Roadster S+14K-J 132-010113-XX Roadster HD14K-J 132-011114-XX Roadster S+18K-J 132-013116-XX Roadster HD16K-J 132-014117-XX Roadster S+22K-J 132-016119-XX Roadster HD20K-J 132-017110-XX Roadster WU20K-J 132-018111-XX J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 16: Safety Warnings And Guidelines

    High leakage current. Earth connection essential before connecting supply. All installation and maintenance procedures must be performed by a Christie accredited service technician. Projector must be operated in an environment that meets operating...

  • Page 17: Ac/Power Precautions

    This provides sufficient time for the lamp cooling fans to properly cool the lamp. For all other precautions critical for safe removal and replacement of the lamp. High leakage current. Earth connection essential before connecting supply.. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 19: 2: Installation And Setup

    Never operate a projector without a lens. Remove the rear lens cap from the lens. Keep the front lens cap on the lens to protect it during installation. 1. Rotate the lens clamp to the OPEN position, as shown. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 20 NOTES: 1) Recommended for heaviest lenses such as 0.73:1 and 1.2:1. Use of the lens red security screws or the lens retaining screws is required if the projector is hoisted or installed in an overhead position. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 21: Position The Projector

    This product can be connected to an IT power distribution system. To prevent the line cord from inadvertent disconnection, perform one of the following steps: J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 22 2. Open the cap on the AC plug and line up the slot on the plug with the pin on the receptacle. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 23: Power Up

    2.1.6 Select a Source Press one of the input keys on the remote, or on the built-in keypad to select and display the image for a connected source. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 24: Adjust The Image

    AC Receptacle The AC receptacle is located above the AC receptacle at the back of the projector. Use this receptacle to plug in an appropriately rated line cord. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 25 • Zoom and Focus: There are two internal lens motors that allow for quick motorized adjustment of zoom and focus. Adjust zoom to fit the displayed image on the screen and adjust focus to improve the clarity of the image. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 26: Installation Considerations

    Rear Screen / Inverted Mount (ceiling) Installation ADVANTAGES CONSIDERATIONS Projector is completely hidden. Requires separate room. Usually good ambient light rejection. Installation cost is usually higher. More difficult to access projector. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 27: Front Screen Installations

    For example, to display a VCR output with a 4:3 aspect ratio onto a 10-foot (3m) high screen, the width of the screen must be at least 13.3 feet (4m). J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 28: Ambient Lighting

    The result determines approximately the distance the projector should be positioned from the screen to project a focused image large enough to fill the screen. For example, using a 0.73:1 lens, throw distance would roughly be 0.73 x screen width. 2-10 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 29: Vertical And Horizontal Position

    IMPORTANT! Use the lens and screen size to calculate the precise throw distance using the lens throw calculator provided in the Dealer Section of the Christie Website, or use the tables provided in 020-100221-XX. Due to lens manufacturing tolerances for lens focal length, actual throw distance can vary ±5% between lenses with the same nominal throw ratio.
  • Page 30 ±50% ±350 pixels NOTES: 1) Offsets are subject to ±7% centering tolerance. 2) % Offset = number of pixels of offset/half horizontal panel resolution x 100. 2-12 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 31 Section 2: Installation and Setup 2-1 V IGURE ERTICAL FFSET XAMPLES J Series 2.0, 2.4 and 3.0 kW User Manual 2-13 020-100707-03 Rev. 1 (02-2014)

  • Page 32: Lifting, Hoisting, And Stacking

    Do not use the handles as safety points, or as points from which to suspend or hoist the projector. Maximum stack = 3 projectors. Stack first, then hoist. 2-14 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 33: Hoisting Guidelines

    Use metric hardware only. Never force incompatible threads. Never hoist a projector by its feet, handles, or any other component. IMPORTANT! Remove the lens before hoisting the projector. J Series 2.0, 2.4 and 3.0 kW User Manual 2-15 020-100707-03 Rev. 1 (02-2014)

  • Page 34: Hoisting Procedure

    Secure a maximum of 3 projectors with the stacking mounts as described below. Do not stack more than 3 projectors. Never attempt to manually carry a stack. Christie stacking hardware required. The top projector could slide off and cause injury or death.
  • Page 35 • If upright, release on top projector • If inverted, release on bottom projector J Series 2.0, 2.4 and 3.0 kW User Manual 2-17 020-100707-03 Rev. 1 (02-2014)
  • Page 36 10. Repeat steps 1–9 if stacking a third projector. Never stack more than 3 projectors. 2-18 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 37: Alignment Procedure

    • If center lines are out by the same amount from top and bottom, use lens offsets (on top projector) to bring the center lines into alignment. J Series 2.0, 2.4 and 3.0 kW User Manual 2-19 020-100707-03 Rev. 1 (02-2014)

  • Page 38: Mounting

    104001-XX. This mounting is recommended for fixed installations and for those that want the projector out of plain view or have limited amount of space for the projector and audience. Use only the Christie approved ceiling mount kit designed for your projector. See the installation instructions and safety guidelines provided in the kit.

  • Page 39: Basic Optical Alignment

    In rear screen applications where space behind the projector is limited, a mirror may be used to fold the optical path. The position of the projector and mirror must be accurately set - if considering this type of installation call your dealer for assistance. J Series 2.0, 2.4 and 3.0 kW User Manual 2-21 020-100707-03 Rev. 1 (02-2014)

  • Page 40: Advanced Optical Alignment

    2.4.9 Advanced Optical Alignment Boresight Alignment Procedure for CT Lens Mount To adjust the boresight on a J Series projector equipped with a CT lens mount, see the Boresight Adjustment Procedure instruction sheet found on the Christie website P/N: 013-100141-04.

  • Page 41: Powering Down

    Web User Interface (UI) 1. From the Main Tab, Select Power > OFF. NOTE: A window will display for confirmation on powering down. 2. Select Yes. J Series 2.0, 2.4 and 3.0 kW User Manual 2-23 020-100707-03 Rev. 1 (02-2014)

  • Page 42: Connect Communications

    As an alternative to the projector keypad or remote, you may wish to communicate using a PC or other controller. Such a device sends commands and receives feedback via serial links (RS-232 and RS-422), or Ethernet communications. See the Serial Command document provided in the Dealer Section of the Christie Website, 020-100224-XX.

  • Page 43: Connect Rs-422

    RXD+ Pin 5 TXD+ Pin 6 Pin 7 Pin 8 Pin 9 +12V(500mA) * DNC are do not connect pins. * NC are no connect pins. J Series 2.0, 2.4 and 3.0 kW User Manual 2-25 020-100707-03 Rev. 1 (02-2014)

  • Page 44: Ethernet Communications

    Section 3 Operation for further information about setting up and using a projector connected via Ethernet, and the Serial Command document provided in the Dealer Section of the Christie Website, 020-100224-XX. 2.5.6 Connect Multiple Projectors RS-232 Network: To connect multiple projectors in a network with serial communication: 1.

  • Page 45: Separate Networks

    RS-232 and RS-422 Joined or All Joined. J Series 2.0, 2.4 and 3.0 kW User Manual 2-27 020-100707-03 Rev. 1 (02-2014)

  • Page 46: Communicate To All Ports

    NOTE: The serial cable required for connecting the external device to the projector’s GPIO connector, must be compatible with the external device. 2-28 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 47: Configuring The Gpio

    Reply of pin configurations - pins 2, 3 and 4 are Inputs, pins 6, 7, 8 and 9 are Outputs NOTE: The strings in the commands refer to pins 2, 3, 4, 6, 7, 8, 9 in order from left to right. J Series 2.0, 2.4 and 3.0 kW User Manual 2-29...

  • Page 48: Projector Communications

    The Web page shows a warning that the Image processor card is upgrading. • When this occurs, the projector should not be AC power cycled and the Image Processor card should not be removed. 2-30 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 49: Connect Sources

    In the case of the output, the LED indicates a signal is currently being looped out. J Series 2.0, 2.4 and 3.0 kW User Manual 2-31 020-100707-03 Rev. 1 (02-2014)

  • Page 50: Analog Bnc Input Card

    3 on the right side of the corresponding connectors indicate that a valid signal has been detected. 2-32 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 51: Video Decoder Input Card

    ArtNET (defined by Artistic License's Art-Net II Specification) is an Ethernet implementation of the DMX protocol. The J Series projector supports the DMX protocol through 2 data input interfaces, 1) a DMX card and 2) ArtNET through the Ethernet connector.

  • Page 52: Twin Displayport Input Card

    SE OF ISTRIBUTION Christie loop-through may be used to set up a tiling array (see Figure 2-5 to Figure 2-10). The system allows wiring (providing the HDCP requirement is met) when HDCP is used by the source. The cascade level of devices must be no more than 7 levels deep.
  • Page 53 • Balance the connection tree to ensure the level of loop-through is minimized. NOTE: This is to enable the downstream projectors to finish source switches in a minimum amount of time. (Applicable to arrays with HDCP only) J Series 2.0, 2.4 and 3.0 kW User Manual 2-35 020-100707-03 Rev. 1 (02-2014)
  • Page 54 (ROW 1, COL 2) (ROW 1, COL 3) From Source (ROW 2, COL 1) (ROW 2, COL 2) (ROW 2, COL 3) 2-8 2 IGURE THROUGH WIRING SOLUTION 2-36 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 55 (ROW 2, COL 2) (ROW 2, COL 3) 2-9 2 IGURE INGLE WIRING LOOP THROUGH NO PIP IS SUPPORTED From Source 2-10 3 IGURE THROUGH WIRING SOLUTION J Series 2.0, 2.4 and 3.0 kW User Manual 2-37 020-100707-03 Rev. 1 (02-2014)
  • Page 56 Section 2: Installation and Setup 2-38 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 57: How To Use The Remote Keypad Or Built-In Keypad

    See Figure 3-1 Remote Keypad for the description of the keys provided for the remote keypad. Laser radiation is emitted from the laser diode in the remote. DO NOT look directly into the beam of the laser. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 58: Remote Keypad

    Section 3: Operation 3.1.2 Remote Keypad 3-1 R IGURE EMOTE EYPAD J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 59 Slot 2 Slot 3 Slot 4 Power Test Pattern Shutter Auto Focus In Focus Out Zoom In Zoom Out Lens Left Lens Right Lens Down Lens Up J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 60: Wired Remote

    • Blue: A functionality is available that is relevant to the built-in LCD only and will not affect the displayed image from the projector • Off: The key is disabled in the current context J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 61: Remote Keypad Commands

    NOTE: You must have an unlocked channel present to use Auto Setup. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 62 (i.e., “crushed”). Conversely, low contrast causes dim images. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 63 (open) to guarantee the correct state (useful if you are unsure of the present state). Alternatively, press S HUTTER HUTTER to toggle from the present on/off state. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 64 (including number editing of a slide bar value) or within pull-down lists. In these cases, E acts as a “cancel”. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 65: Navigating The Menus

    Locked items or items that do not pertain to the current action or condition appear dimmed and cannot be selected. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 66: Online Help

    E NTER NTER to save (or press E to cancel). 3-10 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 67: Edit Text

    Any previously entered text is displayed with its first character highlighted in a square cursor, signifying that this character is ready for editing. J Series 2.0, 2.4 and 3.0 kW User Manual 3-11 020-100707-03 Rev. 1 (02-2014)

  • Page 68: Using Inputs And Channels

    (i.e., input at the projector) can have several different channels associated with it. NOTE: See Section 2 Installation and Setup, for a full explanation of how to connect sources to the projector. 3-12 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 69: How To Select An Input Or A Channel

    • If more than one channel exists for the input, the image will be displayed according to the setup parameters for the first channel with matching characteristics. J Series 2.0, 2.4 and 3.0 kW User Manual 3-13 020-100707-03 Rev. 1 (02-2014)

  • Page 70: Create A New Channel

    Main Channel: 01 iSVid 15.73kHz- i59.94-Hz- pDig 33.72kHz+ p29.07-Hz+ Channel# Signal Horizontal Vertical Type Frequency Frequency Slot i-Interlaced Input p-Progressive 3-4 U IGURE SING A HANNEL 3-14 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 71: Channel Setup Menu

    Composite Video Digital DSDI Digital Dual Link HD-SDI Digital DVI HDMI Digital HDMI HSDI Digital HD-SDI Digital SDI Digital 3G-SDI (Level A) Digital 3G-SDI (Level B) DisplayPort J Series 2.0, 2.4 and 3.0 kW User Manual 3-15 020-100707-03 Rev. 1 (02-2014)
  • Page 72 NOTE: For any deletion, a window will appear to confirm the deletion of the desired channel. Select C ANCEL (default) if you don’t want to delete after all. 3-16 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 73 Channel Setup list. • Next Channel: Select this option to see or change Channel Edit settings for the next channel in the Channel Setup list. J Series 2.0, 2.4 and 3.0 kW User Manual 3-17 020-100707-03 Rev. 1 (02-2014)

  • Page 74: Adjusting The Image

    The Advanced auto setup selection measures the start pixel and start line whereas Default uses the table values as is. 3-18 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 75: Size And Position Menu

    Resize Presets pull-down list. • Select default for most sources (factory default). The image will be centered and displayed as large as possible depending on the type of source. J Series 2.0, 2.4 and 3.0 kW User Manual 3-19 020-100707-03 Rev. 1 (02-2014)

  • Page 76: Size

    3.5.2 Size Controls both the image width and height in tandem, maintaining the current aspect ratio of the displayed signal data. 3-20 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 77: Vertical Stretch

    Ensures that auto setup for any source will maintain the input aspect ratio when the default size is calculated. If disabled and the source is not a special case video source where a default stretch is defined, the source is scaled to fit the platform. J Series 2.0, 2.4 and 3.0 kW User Manual 3-21 020-100707-03 Rev. 1 (02-2014)

  • Page 78: Blanking - Submenu

    (press E or M ). Options Video Options not available for the projector model or source are Input Levels disabled and appear dim (grey). Advanced Image Settings 3-22 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 79: Contrast

    J Series 2.0, 2.4 and 3.0 kW User Manual 3-23 020-100707-03 Rev. 1 (02-2014)
  • Page 80 Decreasing this delay will move the shadow slightly to the left. If necessary for your current source, adjust so that no shadows occur with adjacent colors. 3-24 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 81: Input Levels - Submenu

    NOTE: This automatic adjustment requires at least 6-12 consecutive white pixels in the image. Without these pixels, input levels may produce skewed colors, particularly in non-video images. J Series 2.0, 2.4 and 3.0 kW User Manual 3-25 020-100707-03 Rev. 1 (02-2014)
  • Page 82 3-26 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 83: Advanced Image Settings - Submenu

    3.6.7 Advanced Image Settings - Submenu Use the Advanced Image Settings submenu to make the adjustments necessary for lesser-used but more specialized applications on your projector. J Series 2.0, 2.4 and 3.0 kW User Manual 3-27 020-100707-03 Rev. 1 (02-2014)

  • Page 84: Gamma Settings - Submenu

    This slope can be used to bring in or out the low level blacks in the image. This slope combined with the gamma function, define the custom gamma table. 3-28 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 85: Detail Settings

    • Color Temperature: Allows you to specify a color temperature between 3200 and 9300 based on the setting of the color temperature slide bar. Expressed in degrees Kelvin [3200K, 5400K, etc.]. Lower numbers appear reddish white and higher numbers appear bluish. J Series 2.0, 2.4 and 3.0 kW User Manual 3-29 020-100707-03 Rev. 1 (02-2014)

  • Page 86: Optical Aperture

    See below for aperture Open/Close, and Lock and Unlock dial positions. NOTE: The lock/unlock dial position allows you to open the aperture at a desired position and lock it in place. 3-30 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 87: Configuration - Adjust System Parameters And Advanced Controls

    • Fade To Black Time: This control sets the amount of time (in seconds) that it takes to fade the image to/ from black. NOTE: The OSD only allows the fade time to be set. To initiate a Fade to Black, the Christie Serial command should be used.

  • Page 88: Lens Settings - Submenu

    If this condition persists for an additional time-out period, the projector will automatically go to Standby mode. The presence of any activity within this combined interval will cancel Auto Shutdown and return the projector to normal operation. 3-32 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 89: Date And Time - Submenu

    • Splash Screen Setup: Choose when to display a special introductory splash screen image, such as your company logo, graphic or message. • Always Off – A splash screen never appears J Series 2.0, 2.4 and 3.0 kW User Manual 3-33 020-100707-03 Rev. 1 (02-2014)

  • Page 90: Communications - Submenu

    • Start-up And No Signal – A splash screen appears at start-up and at any time when there is no signal. To add your own splash screen in addition to the default “Christie logo” splash screen, use the Web UI to download the desired bitmap (.bmp) file to the projector.

  • Page 91: Ethernet Settings - Submenu

    • Only 1 DMXC card can be used at a time. If more than one is populated, the 2nd and subsequent cards will not be activated. • The DMXC card will always be active, even when the projector is powered down (i.e. in standby mode). J Series 2.0, 2.4 and 3.0 kW User Manual 3-35 020-100707-03 Rev. 1 (02-2014)
  • Page 92 This control specifies which ArtNET subnet (group of universes) the projector belongs to. The Subnet applies to ArtNET only, and does not apply to the DMXC input card. 3-36 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 93: Snmp - Submenu

    DMX input. • Host Name: This will be used to respond to ArtNET polling queries. ‘Christie’ will be the short name, ‘Christie_HostName’ will be our long name. By default the host name is composed from the projector name and serial number.
  • Page 94 Video input signal detected Video input signal detected Lamp door open Lamp door has been opened Lamp Number Lamp Door Lamp door closed Lamp door has been closed 3-38 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 95: Geometry And Color - Submenu

    All settings to adjust keystone are in the Geometry Correction submenu. Brightness Uniformity, Edge Blending and Black Level Blending should be disabled before performing Keystone adjustments. J Series 2.0, 2.4 and 3.0 kW User Manual 3-39 020-100707-03 Rev. 1 (02-2014)
  • Page 96 If keystone is simply enabled again, the same image corruption may occur. After pressing F , it is recommend to immediately “Reset Keystone Settings”, which will set all keystone co-ordinates to zero. 3-40 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 97: Brightness Uniformity - Submenu

    Your other color temperatures will not necessarily be matched from screen-to-screen. J Series 2.0, 2.4 and 3.0 kW User Manual 3-41 020-100707-03 Rev. 1 (02-2014)
  • Page 98 (i.e., change their light output) until all portions of the left side closely match the center color temperature. Adjust an edge first (focusing on its center), and then adjust its corners. 3-42 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 99: Edge Blending - Submenu

    By controlling blend width and other properties, you can achieve uniformity across the group of images. Visible overlaps will disappear, as shown in Figure 3-11 Edge Blending Concept. J Series 2.0, 2.4 and 3.0 kW User Manual 3-43 020-100707-03 Rev. 1 (02-2014)

  • Page 100: Advanced Edge Blending - Submenu

    Toggle the Show Blending Overlap off to reactivate the blend effect. NOTE: Blending Overlap appears as Reserved when Christie TWIST is installed. Other Functions For convenience, the Edge Blending submenu also includes related options for enabling a specific color and/or test pattern, or for working with colors or the lamp.

  • Page 101: Color Adjustments By X/Y - Submenu

    From the factory, the projector can utilize any of the three pre-defined color performance settings identified at right (default = Max Drives), or colors can be driven on the basis of color temperature. For most applications, J Series 2.0, 2.4 and 3.0 kW User Manual 3-45...

  • Page 102: Color Saturation - Submenu

    Values displayed in the Color Saturation menu, will fluctuate as you use the projector, and will be different when you return to this menu in the future. These floating changes do not affect the x/y coordinates or gamut. 3-46 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 103: Black Level Blending - Submenu

    1x2, 2x1, 1x3, 3x1, 2x2, 2x3, 3x2, 3x3 Projectors are numbered from left to right (left column = 1), and from top to bottom (Top row = 1). J Series 2.0, 2.4 and 3.0 kW User Manual 3-47 020-100707-03 Rev. 1 (02-2014)

  • Page 104: Diagnostics And Calibration - Submenu

    NOTES: 1) When the FUNC+HELP key combination is pressed, the tiling settings will be cleared. 2) Tiled warps/keystones can be enabled through Christie TWIST 1.6; See the Christie TWIST User Manual. 3.9.22Diagnostics And Calibration - Submenu • Test Pattern: Choose the desired internal test pattern to display, or select OFF to turn off a test pattern.

  • Page 105: Service - Submenu

    Access restricted to Christie accredited service technicians. 3.9.24Option Card Settings - Submenu Allows adjustment of any settings specific to each option card that is currently installed in the projector. J Series 2.0, 2.4 and 3.0 kW User Manual 3-49 020-100707-03 Rev. 1 (02-2014)

  • Page 106: Lamp Menu

    This option allows the serial number for the current lamp to be changed. This will apply the serial number to the current lamp statistics file. It will not archive the current statistics as done by the Change Lamp function. 3-50 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 107: Change Lamp - Submenu

    • Pip Position Presets: Choose a preset location and size of the PIP window. While in split screen mode, several channel controls that resize image will be disabled. These controls are size, H-Position and V- Position. J Series 2.0, 2.4 and 3.0 kW User Manual 3-51 020-100707-03 Rev. 1 (02-2014)
  • Page 108 The Main video signal is looped to Output1 and the Secondary video signal is looped to Output2. Select Disable to shut off the HDMI outputs completely. 3-52 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 109: Status

    It ensures a good starting point for further customizing and matching; however, is not critical for all installations. J Series 2.0, 2.4 and 3.0 kW User Manual 3-53 020-100707-03 Rev. 1 (02-2014)
  • Page 110 Auto Color Enable Auto Color Enable Auto Color Enable Color Enable Color Enable Color Enable Copy From Max Drives Copy From Max Drives Copy From Max Drives 3-54 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 111 6. All screens should now be color-matched. Apply this new “User” gamut to a source at any time by selecting it in the “Select Color Adjustment” list accessed in the Advanced Image Settings menu. J Series 2.0, 2.4 and 3.0 kW User Manual 3-55...

  • Page 112: Match Colors In Multiple Screens

    • Via ASCII Messaging: Connect a serial link between your controller and the RS-232 or RS-422 port (recommended), or open an Ethernet socket (i.e., Telnet) between your controller and the valid projector address. Valid ASCII codes and messages are documented in the Christie Serial Communications document available at the Christie website.
  • Page 113 OK soft key to enable the built-in keypad. 2) The alarm condition can also be viewed using the remote in the read only Status menu. J Series 2.0, 2.4 and 3.0 kW User Manual 3-57 020-100707-03 Rev. 1 (02-2014)

  • Page 115: 4: Web User Interface

    3. Type your user name and password in the User Name and Password fields respectively. Both entries are case-sensitive. 4. Click the Login button. The Main window appears. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 116: Navigate The Web User Interface

    Help button, if available. To disable this feature, go to: Admin > System > Tooltip: Hide. NOTE: Help text is not available for a disabled button. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 117: Basic Operation

    The LED color of the category indicates that it is in one of the following states: • Green = Good • Yellow = Warning • Red = Error For more information about each LED, click a category for details. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 118: Main Tabbed Page - Lens

    (see for more Section 3 Operation the OSD. Control of the OSD is details). always available through the remote. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 119 NOTE: If you click the menu option, the field cannot be edited. 3. Edit the field entry. 4. Press E NTER to save your changes. Numeric field selected Menu option selected 4-2 S IGURE ELECT UMERIC IELD J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 120: Admin Tabbed Page - System

    Under the Admin tabbed page, select the System secondary tab to upgrade, upload, backup and restore specific files, change the Logo position, background color, gamma properties, and select the interrogation level. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 121 Click the Upload button to display the Gamma Upload window. Click Yes or No to confirm or cancel the upload respectively. An Upload in Progress window appears. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 122: Admin Tabbed Page - Users

    2. Type your username and password in the User name and Password fields respectively. 3. Re-type your password in the Re-type Password field. 4. Click Ok to save. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 123: Advanced Tabbed Page - Rte

    • Stop: Discontinue the event running • GPIO Setup: Used to configure the GPIO pins as inputs/outputs and to set the current state of the output pins J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 124 - GPIO Connector • Click the Help button for a description of special RTE commands available for adding loops and delays to the command sequence. 4-10 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 125 +12V and Pin 5 = Ground are not included or changed. 2) Clicking a block toggles between H, L, and X as shown. See 2.5.9 System Integration - GPIO Connector for detailed information. J Series 2.0, 2.4 and 3.0 kW User Manual 4-11 020-100707-03 Rev. 1 (02-2014)
  • Page 126 About Tabbed Page Provides information about the projector software version, model, serial number, and license information. NOTE: The information provided on the Version and License tabs are read-only. 4-12 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 127: Lamp And Filter Replacement

    ‘hot spot’, which could potentially result in lamp failure. It is recommended you wear a face shield when working with the lamp. For this procedure you will need the appropriate Lamp and Filter Kit manufactured by Christie Digital Systems. See Table 5.1.
  • Page 128 Protective gear is required to protect the eyes. Wear a face shield. 4. Unscrew the knob on the insertion/removal handle either by hand or using a Phillips screwdriver5.. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 129 8. Secure the insertion/removal lever by threading the know into the threaded block by hand or using a Phillips screwdriver. 9. Using a Phillips screwdriver, secure the lamp door. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 130: Filter Replacement Procedure

    Christie approved Lamp and Filter Kit for your specific projector model. See Table 5.1. 1. Before removing or installing a filter, turn off the projector and allow it to cool for 5 minutes before disconnecting the AC power cord.

  • Page 131: Replacing The Projection Lens

    3. While holding the lens flat against the lens mount, rotate the lens clamp clockwise to lock the lens assembly in place. 4. Remove the front lens cap. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 132: Cleaning The Lens

    2. Roll a lens tissue around a swab and soak it in coated optics cleaning solution. Tissue should be damp, but not dripping. 3. Gently wipe the surface using a figure-8 motion. Repeat this motion until the blemish is removed. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 133: Liquid Coolant Maintenance

    Christie for your projector. Using unapproved coolant can result in projector damage and will void the warranty. 5.4.1 Check Liquid Coolant Level The Liquid Cooling Module should be drained and refilled every two years. Use only Christie approved coolant (003-103148-XX). 1. Remove the 3 stacking mounts, if installed.

  • Page 134: Remove The Liquid Coolant Module From The Projector (Optional)

    High leakage current. Earth connection essential before connecting supply. • Only use attachments or accessories recommended by Christie, such as the specific power cord supplied. Use of other attachments or accessories with this projector may result in the risk of fire, shock or personal injury.

  • Page 135: Ventilation

    • The projector has been exposed to excessive moisture • The projector does not operate normally • The projector has been dropped or the case has been damaged • Projector performance has deteriorated J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 137: Power

    If the projector is not operating properly, note the symptoms and use this section as a guide to resolve the problem. If the problem cannot be resolved. contact your dealer for assistance. NOTE: A Christie accredited service technician is required when opening an enclosure to diagnose any “probable cause”.

  • Page 138: Lamp Suddenly Turns Off

    6. Using the XLR connector, use the remote as a “wired” keypad. If it does work and all the IR sensors have been enabled, then there may be a problem with the IR sensors. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 139: Osd

    6.7.3 Image Appears ‘Squeezed’ or Vertically Stretched into Center of Screen 1. Run auto setup, pressing A button on the remote keypad. 2. Check your resizing selection. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 140: The Display Is Jittery Or Unstable

    Power down the projector and disconnect from AC. Then plug in again and power up as usual. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 141: Colors In The Display Are Inaccurate

    Once the Delete Cookies window displays, click Yes then click Close. Click OK to close the Internet Options window. 3. Close the browser and re-open before connecting to the projector. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 142: A Backup Or Interrogator File Cannot Be Saved

    OK. Once the Warning window displays, click OK. 4. Using the Internet Option window, select Local intranet, then click Custom Level. Repeat Step 3. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 143: Image Performance

    7 Specifications This section provides detailed J Series features; including inputs, lamp, and power requirements. NOTE: Due to continuing research, detailed features are subject to change without notice. Image Performance 7.1.1 Pixel Format 1080p (H x V square pixels) 1920 x 1080...

  • Page 144: Gamma

    Blemishes are defined as per TI Specification 2506811. Red screen No blemishes Green screen No blemishes Blue screen No blemishes White screen No blemishes Black screen No blemishes J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 145: Feature Set

    7.2.5 Projection Lens Compatibility Lens type Reverse Telocentric Internal-focus Motorized zoom and focus with position feedback NOTE: Calculated Throw distance values are subject to a ±5% lens tolerance J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 146: Automatic Fans

    All light blocked - no light on screen Activation Operation in less than 0.25 seconds. 7.2.9 Lamp Ushio Xenon bubble lamp system Lamps are accessed from the rear of the projector J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 147: Status Led

    6 user inter-changeable – hot swappable Number of processor cards 2 user inter-changeable Number of option slots 4, option cards; 1, processor card Arbitrary Gamma User definable gamma curves J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 148: Image Processor Performance

    2 loop-out connectors type A Color spaces/signal types YCbCr (4:2:2) YCbCr (4:4:4) HDCP support HDMI 1.3 supported (not including audio) except: 12-bit color dithered to 10 bits; 16-bit color not supported J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 149: Dual Link Dvi Input

    7.4.6 DisplayPort Input Connectors 2 independent DisplayPort inputs 2 loop-out DisplayPort connectors Color spaces/signal types YCbCr (4:2:2) YCbCr (4:4:4) HDCP Support on inputs DisplayPort 1.1a supported (not including audio) J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 150: Control Signal Compatibility

    12 V ±5% @ 400 mA maximum 7.5.5 Ethernet Number of ports Standard 10/100 Base-T Connector Female RJ-45 7.5.6 USB 2.0 Device Port Number of ports Standard Not supported (non-functional) J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 151: Gpio

    12AWG type SJT with plug, NEMA 6-20P, 20A 1900W 12AWG type SJT with plug, NEMA 6-20P, 20A Inrush Current 60 A max Maximum Power Consumption 3000W 4000W 2400W 3200W J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 152: Lamp Specification

    Maximum shipping weight (includes packaging) 91 kg (200 lb.) Reliability and Serviceability 7.8.1 Reliability MTBF – excluding consumable components 11,000 hrs Consumable components Air filters, fans, lamps 7-10 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 153: Serviceability

    Lens ILS 1.2SX+/1.1HD 118-101103-XX   ILS Lens Conversion Kit 108-331108-XX   CT MOUNT Xe Bubble 132-112105-XX   Kit Upgrade S+14K-J to Mirage 132-103105-XX J Series 2.0, 2.4 and 3.0 kW User Manual 7-11 020-100707-03 Rev. 1 (02-2014)

  • Page 154: Regulatory

    • EU Regulation (EC) No. 1907/2006 on the registration, evaluation, authorization and restriction of chemicals (REACH) and the applicable official amendments. • EU Directive (2012/19/EU) on waste and electrical and electronic equipment (WEEE) and the applicable official amendment(s). 7-12 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 155: Marking

    • United States society of the plastics industry (SPI) resin identification code (1988); • ISO standards on marking of plastics (11469:2000, 1043-1:2001, 1043-2:2000, 1043-3:1996, and 1043- 4:1998). J Series 2.0, 2.4 and 3.0 kW User Manual 7-13 020-100707-03 Rev. 1 (02-2014)

  • Page 157: J Series Menu Tree

    Appendix A: Menu Tree A.1 J Series Menu Tree J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 159 Appendix A: Menu Tree J Series 2.0, 2.4, and 3.0kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 160 Appendix A: Menu Tree J Series 2.0, 2.4, and 3.0kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 161 Appendix A: Menu Tree J Series 2.0, 2.4, and 3.0kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 163: Dmx And Real Time Events

    You must ensure that any interim or final lens positions, at any time during the lens movement, do not enter the keep out area. Facing Screen 2050 -100 Keep Out Keep Out -2050 -2050 -400 2050 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 164: Dmx Channel Setup

    Projector 3 (38 ch) Table B.3 “Show personality” Incorrect Example Base Channel All projectors using Show Personality (Incorrect) Projector 1 (18 ch) Projector 2 (18 ch) Projector 3 (18 ch) J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 165: J Series Setup Personality

    0 to 9 Projector Channel 1 10 to 19 Projector Channel 2 20 to 29 Projector Channel 3 — 180 to 189 Projector Channel 19 190 to 199 Projector Channel 20 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 166 200W lamps: 0% 300 Watt / 150 Watt — 127 50% 335 Watt / 175 Watt — 255 100% 370 Watt / 200 Watt J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 167 120-139 User setting 3 140-159 User setting 4 Colorimetry Color Purity 0-85 CPF Off Filter 172-255 CPF On This is the global CPF control, not the channel control. J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 168: J Series Show Personality

    172-255 Live video (Picture mute channel can be used to OFF) achieve the same effect. Lens Shutter 0-85 Shutter Closed (Black Screen) 172-255 Shutter Open (Live Video) J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 169 170 to 179 Slot 3, Input 6 180 to 189 Slot 4, Input 1 ..230 to 239 Slot 4, Input 6 Image Image Freeze 0-85 Unfreeze image 172-255 Freeze image J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)

  • Page 170: J Series Nitro Vip Projector Yoke Personality

    0 to 255 Scaled as % of total control Locked by channel position range, which is 0 to 2100 “Lens shift enable”. (Coarse) Lens Lens Vertical position (Fine) J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 171 130-134 Checker 135-139 13 Point 140-144 Color Bars 145-149 Aspect Ratio 150-154 Edge Blend 155-159 Boresight — 171 EXECUTE — Image Freeze 200-209 Freeze image 210-219 Unfreeze image J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 172 0 to 255 Scaled as % of total range, which is 0 to 100 Colorimetry Gamma 0 to 255 Scaled as % of total range, which is -100 to 100 B-10 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 173 0 to 255 Scaled as % of total control *Output Color control Color range, which is 3200 to 9300 must be set to “Color (Temperature)* Temperature” in DMX channel 20. J Series 2.0, 2.4 and 3.0 kW User Manual B-11 020-100707-03 Rev. 1 (02-2014)
  • Page 174 50-59 Triggers RTE 5 60-69 Triggers RTE 6 70-79 Triggers RTE 7 86 LOAD 171 EXECUTE Reserved Reserved for future expansion Reserved Reserved for future expansion B-12 J Series 2.0, 2.4 and 3.0 kW User Manual 020-100707-03 Rev. 1 (02-2014)
  • Page 175 *000-102356-03* ASSY TECH DOCS J Series H P Corporate offi ces Worldwide offi ces USA – Cypress Australia Eastern Europe and India Singapore ph: 714-236-8610 ph: +61 (0) 7 3624 4888 Russian Federation ph: +91 (080) 6708 9999 ph: +65 6877-8737 ph: +36 (0) 1 47 48 100 Canada –...
  • Page 176 For the most current technical documentation, please visit www.christiedigital.com...

This manual is also suitable for:

J 2.0 kwJ 2.4 kwJ 3.0 kw

Table of Contents