Removing The Electronics-Side Cover; Removing The Bottom Cover - Christie Boxer 4K Series Service Manual

4. To install the optics-side cover, repeat these steps in reverse order.

Removing the electronics-side cover

The electronics-side cover provides access to side panel display and card cage.
Estimated replacement time: 1 minute
1. Loosen the six captive screws securing the electronics-side cover.
2. Remove the electronics-side cover.
3. If required, replace the electronics-side cover.
4. To install the electronics-side cover, repeat these steps in reverse order.
The chassis serial # should match the electronics-side cover when installing the cover.

Removing the bottom cover

The bottom cover provides access to power supply and fold mirror 2.
Estimated replacement time: 1.5 minutes
1. Flip the projector onto its side.
2. Loosen the six captive screws securing the bottom cover.
3. Remove the bottom cover.
Boxer 4K Service Guide
020-101699-04 Rev. 1 (02-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Projector covers and feet
36