Normal Power Up (Lcd Keypad And Rear Status Leds) - Christie J Series Service Manual

Normal power up (LCD keypad and rear status
LEDs)
Understand the normal power up sequence.
The color of the keypad key indicates the state of the key:
• Amber—Functionality is available which affects the displayed image of the projector.
• Blue—Functionality is available and relevant to the built-in LCD only and does not affect the
displayed image of the projector.
• Off—The key is disabled in the current context.
Once the projector is in standby mode, use the down arrow on the keypad to interact with the
projector.
Time Rear status LEDs
(approximate
Lamp-1
)
0 seconds Amber
30 seconds Off
40 seconds Off
1 minute and 40 Off
seconds to 1
minute and 50
seconds
1 minute and 50 Off
seconds to 1
minute and 55
seconds
J Series Service Guide–2.0, 2.4, and 3.0 kW
020-100739-05 Rev. 1 (02-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
COMM Status
Amber Amber
Off Off
Off Off
Off Off
Off Amber
Troubleshooting
LCD display
Shutter
Amber Please Wait
Off Please Wait
Off Initializing
projector
Off Initializing
projector
Amber Standby mode
Press and hold
Power to turn on
projector
24