Adjusting Convergence - Christie J Series Service Manual
2.0, 2.4, and 3.0 kw
Hide thumbs
Also See for J Series:
- User manual (176 pages) ,
- Service manual (77 pages) ,
- Setup manual (60 pages)
Table of Contents
Advertisement
Measurement area
Zone A
Zone B
Zone C
Adjusting convergence
Evaluate the convergence of green to red and blue to green.
1. Loosen the four lock-down screws.
2. Adjust the blue or green DMD with screws A, B, and C.
Do not adjust screws B and C individually. Adjustments are delicate. Minimal force is required
when adjusting.
J Series Service Guide–2.0, 2.4, and 3.0 kW
020-100739-05 Rev. 1 (02-2018)
Copyright
2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Maximum convergence error (pixels)
1/4
1/2
3/4
Service setups
19
Advertisement
Table of Contents
