Electronics-Side Cover - Christie CineLife+ CP4415-RGB Service Manual

5. To re-install, follow these steps in reverse order.

Electronics-side cover

The electronics-side cover provides access to the card cage, rear IOS, and reservoir module.
1. Loosen the four screws securing the electronics-side cover.
2. Remove the electronics-side cover.
3. Replace the electronics-side cover, if required.
4. To re-install, follow these steps in reverse order.
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Projector covers and feet
46