Christie J Series Service Manual page 27

2.0, 2.4, and 3.0 kw

Hide thumbs Also See for J Series:

Table of Contents

Retrieve more information with the HTL+LSOL?3 serial command. The projector responds with:

HLT+LSOL!003 "Failed to assign I2C address to Thermal Sensor. Verify Sensor

Configuration File. Detection Failure for Thermal Sensor. Check cables and

Configuration File.

For more information about the HLT command, see the J Series Serial API Commands Technical

Reference (P/N: 020-100796-XX) available on the Christie website.

J Series Service Guide–2.0, 2.4, and 3.0 kW

020-100739-05 Rev. 1 (02-2018)

Troubleshooting

Table of Contents