Projector covers
Learn how to remove the covers and feet of the projector.
Removing the top cover
The top cover and top shielding provide access to the main board and other components.
1. On the sides, remove the twelve captive screws with a Phillips #1 screwdriver. then use a flat
head screw driver to press the four tabs on the front cover to release the cover. Unplug FPC
cable and disconnect the two IR camera harness connectors to remove the top cover module.
2. Remove the keypad board.
SeRemoving the keypad board
3. Remove the IR camera module.
See
Removing the IR camera
4. Remove the top cover.
DHD410S Service Manual
020-001481-01 Rev. 1 (10-2018)
on page 77.
on page 65.
46