Projector covers and
feet
Learn how to remove the covers, feet, and optional touch panel controller (TPC) of the projector.
Warning! If not avoided, the following could result in death or serious injury.
•
Prior to rigging the projector, inspect the quarter-turn fasteners on the covers to ensure they are
safely secured.
•
Prior to rigging the projector, always tighten the lock nut on the projector feet against the
bottom of the projector to lock the feet. Otherwise, the feet must be removed.
Front-top cover
Remove the front-top cover to gain access to the light engine and liquid cooling system
compartments.
1. Unlock front-top cover using the low-security key provided.
2. Lift the cover up and remove.
3. To re-install, follow these steps in reverse order.
CP2420-Xe and CP4420-Xe Service Guide
020-103566-02 Rev. 1 (07-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
50