Projector Covers And Feet; Removing The Top Cover - Christie GS Series Service Manual

Projector covers and
feet
Learn how to remove the covers and feet of the projector.

Removing the top cover

The top cover and top shielding provide access to the main board and other components.
1. Remove the lens ring module by rotating it counter-clockwise.
2. On the rear cover side, remove the four M3 screws with a Phillips #1 screwdriver.
3. Flip the projector over.
4. On the bottom cover side, remove the four M3 screws with a Phillips #1 screwdriver.
GS Series 630-635 Service Manual
020-001224-02 Rev. 1 (08-2018)
51