1. Manuals
  2. Brands
  3. Christie Manuals
  4. Projector
  5. 163-059105-XX
  6. User manual

Christie 163-059105-XX User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Guide
020-103073-10
CineLife+

Advertisement

Table of Contents
loading

Related Manuals for Christie 163-059105-XX

Summary of Contents for Christie 163-059105-XX

  • Page 1 User Guide 020-103073-10 CineLife+...
  • Page 2 Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied warranties of fitness for a particular purpose.

  • Page 3: Table Of Contents

    Turning the touch panel on or off......... 19 Understanding the Christie touch panel interface and remote user interface... . 19 Turning on or off the light source.
  • Page 4 Viewing lamp information..........60 CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 5 Deleting a MCGD file..........77 CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 6 Editing a scheduled event..........92 CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 7 Christie ACT actions........
  • Page 8 Environmental........... .108 CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 9: Introduction

    • CP4420-Xe Product documentation For installation, setup, and user information, see the product documentation available on the Christie Digital Systems USA Inc. website. Read all instructions before using or servicing this product. 1. Access the documentation from the Christie website: •...

  • Page 10: Safety Precautions

    Introduction Safety precautions Learn about the safety precautions related to the Christie CineLife+ projector. This projector is intended for use in a cinema environment. General safety precautions Read all safety and warning guidelines before installing or operating the projector. Warning! If not avoided, the following could result in death or serious injury.

  • Page 11: Laser Safety Precautions

    • EXPLOSION HAZARD! Always wear protective safety clothing (gloves, jacket, face shield) approved by the manufacturer whenever the lamp door is open or when handling the lamp. Any local or federal specifications take precedence over Christie's protective clothing recommendations. •...

  • Page 12: Light Intensity Hazard Distance

    (Zone C) is not needed. • E—Represents the top view of the projector. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 13: Cinemaster Cinema Calculator Tool

    "No direct exposure to beam shall be permitted". • The Christie Laser Projection System Installation Checklist must be fully completed after the installation and sent to lasercompliance@christiedigital.com. A copy can remain on-site. This checklist can be found as a separate document in the accessory box with the manual.

  • Page 14: Operating The Projector

    • Fans run at full speed. • Chiller is on (CP4440-RGB and CP4450-RGB projectors only). • IMB is on. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 15: System Operation For Cp4440-Rgb And Cp4450-Rgb Projectors

    Flashing yellow Warning Warning exists but has not been acknowledged by the operator. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 16: Logging Into The Projector

    USB-C port and the USB port on the Video Input panel. Selecting the recessed button transitions the projector from Standby to powered on. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 17: Resetting The Projector Ip Address To The Default

    USB-C port and the USB port on the Video Input panel. Selecting the recessed button transitions the projector from Standby to powered on. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 18: Using The Remote User Interface (Ui)

    4. If the projector has a GDC IMB SR-1000 installed and configured, access the GDC IMB Web UI by using the Media Block tab. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 19: Turning The Touch Panel On Or Off

    If no touch panel is installed, use the Remote UI feature. See Using the Remote user interface (UI) (on page 18). CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 20: Turning On Or Off The Light Source

    If turning on the light source when the projector power is off, power is turned on automatically. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 21: Opening Or Closing The Shutter

    To use a public NTP server, select Public Server and complete the Country and Server fields. 6. To test the connection, select Test. 7. Select Add. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 22: Deleting A Network Time Protocol Server

    1. In the left navigation menu, select Service Setup > Time Setup. 2. Select the Time Zone tab. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 23: Changing The Orientation Of The Projected Image

    1. In the left navigation menu, select Service Setup > Preferences. 2. Select General. 3. In the Temperature Units list, select Celsius or Fahrenheit. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 24: Video Input Panel

    Software-Defined Video over Ethernet Not used. (SDVoE) port USB-C port Connects the projector touch panel. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 25: Hdmi Video Source

    Fractional 1/1.001 frame rates, 1920 x 1080 (HD), and 3840 x 2160 (UHD) formats are also supported. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 26 /4:2:2 2048x1080 24, 25, 30, 50, 60 Y'C' /RGB/ 8/10/12 bpc Frame-packing 4:4:4 /4:2:2 CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 27: Sdi Video Source

    Fractional 1/1.001 frame rates, 1920 x 1080 (HD), and 3840 x 2160 (UHD) formats are also supported. Single-link 2D image formats The following single-link 2D SDI image formats are supported. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 28 10 bpc 2160p 4:4:4:(4) Y'C' /RGB component at 12.0 Gb/s (ST 2082-10) mode 1 structure CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 29 (ST 292-1) 1280x720 24, 25, 30, 50, Y'C' /4:4:4(4) 10 bpc HD 720p Y'C' /RGB CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 30 12 bpc HD 1080p Y'C' component at 12.0 Gb/s (ST 2082-10) mode 2 structure CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 31 1 structure 3840x2160 24, 25, 30 Y'C' /RGB/ 10 bpc 2160p 4:4:4:(4) Y'C' /RGB CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 32 1920x1080 48, 50, 60 Y'C' /4:2:2 12 bpc Y'C' component at dual-link 3 Gb/s CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 33 Input 1 = SDI 1 and SDI 2 • Input 2 = SDI 3 and SDI 4 CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 34 /RGB/ 10 bpc Y'C' 4:4:4:(4) component at dual-link 6 Gb/s (ST 2081-11) mode 1 CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 35 /4:2:2 12 bpc Y'C' component at quad-link 3 Gb/s (ST 425-5) structure 4 level CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 36 12 bpc Y'C' /RGB 4:4:4 component at quad-link 12 Gb/s (ST 2082-12) mode 2 structure CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 37 3840x2160 24, 25, 30 Y'C' /4:2:2 12 bpc Y'C' component at quad-link 3 Gb/s CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 38 12 bpc Y'C' /RGB 4:4:4 component at 12.0 Gb/s (ST 2082-10) mode 2 structure CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 39 2 structure 1920x1080 96, 100, 120 Y'C' /4:2:2 10 bpc HD 1080p Y'C' CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 40: Displayport Video Source

    The following image formats are supported by the DisplayPort inputs. Frame rates also include fractional 1/1.001 frame rates. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 41 The following single-link DisplayPort PC image formats are supported. Format Cables Frame rate Sampling Bit-depth (Hz) 1280x800 8bpc CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 42: Integrated Media Block (Imb) Video Source

    Enables connection of MPEG-2 MXF interop video formats. Enables connection of SMPTE-compatible 2D and 3D video formats Contact Christie Technical Support to learn which S2 and S4 IMB devices are compatible with Christie projectors. Series 2 Integrated Media Block (IMB) video formats S2 Integrated Media Block (IMB) video format support is determined by the IMB make and model.
  • Page 43 SMPTE 428-1-2019 2048x1080 48.0 X’Y’Z’ (4:4:4) 12-bits SMPTE 428-11-2013 2048x1080 50.0 X’Y’Z’ (4:4:4) 12-bits CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 44 30.0 x 2 SMPTE 2048-1-2011 48.0 x 2 Am1:2016 SMPTE 2048-1-2011 50.0 x 2 Am1:2016 CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 45: Series 4 Integrated Media Block (Imb) Video Formats

    704 x 576 120.0 120.0 23.0 8-bits 625 SD 800 x 600 120.0 120.0 23.0 8-bits CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 46 24.0 x 2 X’Y’Z’ (4:4:4) 12-bits 2048 x 1080 48.0 x 2 X’Y’Z’ (4:4:4) 12-bits CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 47: Hdmi Video Source Connection From An Integrated Media Block (Imb)

    Media Block (IMB) devices. The input configurations supported are determined by the IMB device directly. Contact Christie Technical Support to learn which IMB devices provide HDMI source selection from the projector user interface. HDMI input selection directly from the IMB may also be possible using the IMB user interface. The input configurations supported are determined by the IMB make and model.
  • Page 48 The 5 VDC (pin 19 and pin 20) is intended for use to supply the inputs. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 49 Outputs are solid state relays with a 1 A AC/DC rating at up to 48 V. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 50: Managing The Laser Light Source

    13. If the laser file will be associated with a 3D channel, complete the following steps: CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 51: Creating A New Laser File For External Chiller-Based Projectors

    Mount a 3D glass or filter on the color meter to measure the brightness through the glasses. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 52: Modifying An Existing Laser File

    3. From the Laser File list, select the file to copy. 4. To save the new laser file, select Save As. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 53: Deleting A Laser File

    Re-doing this calibration is required if the following is replaced: • Color sensor board Christie recommends re-doing this calibration if any of the following are replaced: • Light engine •...

  • Page 54: Liteloc ™ Sensor-To-Screen Calibration: Workflow

    Sensor values fields are automatically populated by the projector for the currently selected drive percentage value. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 55: Recalibrating An Existing Calibration File

    Managing the laser light source b) When the countdown ends, take x, y, and fL measurements using the spectroradiometer. Christie recommends taking meter readings from the center of the screen to obtain accurate screen measurements. c) Under Measured Values, using the numeric keypad record the associated spectroradiometer values for x, y, and fL.

  • Page 56: Editing The Existing Calibration File Parameters

    0.0001 to 0.9999 • fL value range: 0.01 to 9999.99. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 57: Verifying The Sensor-To-Screen Calibration

    3. From either the 2D Sensor-to-Screen Calibration File or 3D Sensor-to-Screen Calibration File list, select the calibration file. 4. Select Save. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 58: Managing The Lamp

    1. In the left navigation menu, select Lamp Settings > Lamp Power/LiteLOC Setup. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 59: Enabling Lamp Overdrive

    7. Repeat steps 5 to 6 taking your readings at the screen instead of at the lens. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 60: Viewing Lamp Information

    2. In the Alarm Triggers area, select Lamp Half Life. Lamp power ratings and warranty hours Determine the minimum and maximum lamp power ratings and warranty hours for each lamp. Find more information about Cinema lamp warranties on the Christie website: https://www.christiedigital.com/help-center/warranties/cinema-warranties/ CP2415-Xe...
  • Page 61 1,000 2,100 3,000 100% CDXL-30SP 1,900 2,100 3,000 100% CDXL-30SUP 1,500 2,100 3,000 100% CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 62: Managing User Accounts

    Learn how to create new user accounts, modify the properties of those accounts, and remove the accounts. A user account is a set of credentials consisting of both a user name and password allowing access to projector settings. Default user access permissions The following table lists the Christie touch panel access permissions. Permission Description installer Can define Ethernet settings (IP network address), restore backup files, and upgrade the system software.

  • Page 63: Changing A User Account Password

    2. In the left pane, select a user account. 3. Select Delete. 4. To confirm the deletion, select Delete. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 64: Network Settings

    The color of the slider changes to green to indicate it is active. 4. In the SNMP Settings area, select the SNMP version. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 65: Downloading Mib Information

    5. In the Name field, enter a name for the MIB file. 6. Select Accept. 7. Select OK. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 66: Managing Content, Playlists, And Storage

    • Setting up playback automation For information about the GDC IMB, refer to https://www.gdc-tech.com/english/manual_list.php?c=d_cinema. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 67: Setting Up An Integrated Media Block

    1. To set the type of IMB, select Service Setup > Preferences. 2. Select IMB. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 68 Setting up an integrated media block 3. Enable the IMB Powered in Standby option. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 69: Working With Channels

    • SDI - Dual-Link 3D LR (1,2)(3,4) • DisplayPort - 1 • DisplayPort - 2 • DisplayPort 3D LR CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 70: Adding A Channel For Hdmi Input

    Select the input signal sources from one of the following: • HDMI Input - 1 CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 71 Bypass (Default) Warp File Warp file associated with the channel. Bypass (Default) 4. Select Save. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 72: Adding A Channel For Integrated Media Block (Imb) Input

    3D encoding. • 3D Line Interleaved—The left-eye and right-eye data are sent on alternating lines. 3D Sync Input Mode is not required when using the Christie IMB. For GDC IMB devices, the recommended setting is 3D Line Interleaved. ™...

  • Page 73: Adding A Channel For Sdi Input

    Specifies whether a specific frame of input data has left-eye or right-eye data. Select one of the following: CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 74: Selecting The Active Channel

    1. In the left navigation menu, select Channel Setup. 2. In the left pane, select a channel. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 75: Copying Existing Channel Settings To A New Channel

    2. In the left pane, select a channel. 3. Select Delete. 4. To confirm the deletion, select Delete. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 76: Managing Color Setting Files

    2. In the MCGD File list, select a MCGD file. 3. Edit the measured color values. 4. Select Save CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 77: Copying Existing Mcgd File Settings To A New File

    12. To adjust the color of the white light in a specific area of the screen, select White Tolerance and a screen area. 13. Select Save. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 78: Editing An Existing Tcgd File

    2. In the TCGD File list, select a TCGD file. 3. Select Delete. 4. To confirm the deletion, select Delete. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 79: Adjusting The Image Size And Position

    ) or Down ( ) to increase or decrease image zoom. 7. Select Save. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 80: Automatically Calibrating The Ils

    1. In the left navigation menu, select Image Settings > ILS File Setup. 2. Select Reset Lens. 3. In the confirmation dialog, select Continue. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 81: Electronically Adjusting Convergence

    (in image 1 below) was moved to the right so they overlap to create the single white sprite (image 2 below). CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 82: Creating A Source File

    2. Select Create Source File. 3. Enter a name for the source file and select Create. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 83: Editing Source File Settings

    1. In the left navigation menu, select Image Settings > Screen File Setup. 2. Select Create Screen File. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 84: Editing Screen File Settings

    3. Select Save As 4. Enter a name for the source file and select Save. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 85: Deleting A Screen File

    Warp files are created using an automated process through Christie Mystique. For more information on using Christie Mystique in a cinema environment, see the Mystique User Guide—Cinema Edition (P/N: 020-001240-XX). 1. Using Christie Mystique, create the required warp file.

  • Page 86: Adjusting The Image

    2. If the keystone effect is severe, unevenly adjust the feet to compensate for projector tilt. Christie recommends using the lens offset to align the center of the image to the center of the screen before correcting the keystone effect.

  • Page 87: Masking The Screen Edges

    Close the curtain for flat images or open the curtain and zoom for scope images. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.
  • Page 88 Side masking to hide screen edges 1.85:1 image (flat) 2.39:1 image (scope) Masking moved aside CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 89: Test Patterns

    Turn off a test pattern when adjustment of the projected image is complete. 1. In the right toolbar, select Test Patterns. 2. Select Test Pattern Off. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 90: Importing A Test Pattern

    5. To confirm the deletion, select Delete. 6. In the upper right corner, select Done. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 91: Working With The Scheduler

    12. To prevent the scheduled event from being overwritten, select the Lock Event slider. Locked events cannot be overwritten by pasted events. 13. Select Create Event. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 92: Editing A Scheduled Event

    1. In the left navigation menu, select Scheduler. 2. In the calendar view, select the scheduled event. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 93: Deleting A Scheduled Event

    2. To disable scheduled events, select the Scheduler is on slider. The color of the slider changes to grey to indicate it is inactive. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 94: Automation

    Opens the douser (shutter). Douser Close Closes the douser (shutter). Light Turns the light on. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 95: Fire Alarm Macro

    You can also create a custom macro that uses the fire alarm trigger or edit the default fire alarm macro to perform other actions as needed. Christie ACT actions The following built-in commands are available for Christie ACT. Command Description Buzzer Activates the buzzer for the specified time (in milliseconds).

  • Page 96: Jnior Actions

    (www.integpg.com). Port 9200 is the default Ethernet port for sending automation commands to the JNIOR. • The jnior login must be disabled and the jnior user name and password removed in the Christie software to allow the cues to pass over the network. •...

  • Page 97: Ska-3D Actions

    1. In the right toolbar of the touch panel, select Run Macro. 2. Select a macro. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 98: Adding An Action Item To An Existing Macro

    4. In the Device Type list, select the device type. 5. In the Select Device list, select the device. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 99: Modifying Automation Device Settings

    2. In the left pane, select an automation device. 3. Select Delete. 4. To confirm the deletion, select Delete. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 100: Creating, Editing, And Deleting Playlist Triggers

    3. Browse to the location of the device library file. 4. Select the file and select Accept. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 101: Viewing A Device Library

    2. To the right of the device library, select Delete. 3. To confirm the deletion, select Delete. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 102: Backing Up, Restoring, And Upgrading Files

    5. Select the file and select Accept. 6. If the file already exists, in the confirmation dialog select Overwrite. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 103: Sorting Backup Files By Name And Date Created

    An upgrade package is used to upgrade the projector software to the latest version. The upgrade package is installed from a USB key or from the projector's ftpuser directory. To obtain the upgrade package, contact Christie Technical support. 1. Power on the projector and place it in Standby mode.
  • Page 104 7. To begin the upgrade, select Upgrade in the confirmation dialog. The projector restarts automatically when the upgrade is complete. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 105: Accessing Projector Diagnostics

    1. In the left navigation menu, select Laser Settings > Laser Diagnostics. 2. Review the detailed information for the following: CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 106: Downloading A Certificate

    3. In the Name field, enter a name for the certificate file. 4. Select Accept. CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 107: Regulatory

    > 16 A and ≤ 75 A per phase Immunity • CISPR 24/EN55024 EMC Requirements – Information Technology Equipment CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

  • Page 108: Environmental

    Regulation (EC) No. 1907/2006 on the registration, evaluation, authorization and restriction of chemicals (REACH) and the applicable official amendment(s). CineLife+ User Guide 020-103073-10 Rev. 1 (02-2023) Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved. If printed, please recycle this document after use.

This manual is also suitable for:

Cinelife+ cp4415-rgb

Table of Contents