Projector covers and
feet
Learn how to remove the covers and feet of the projector.
Removing the top cover
The top cover and top shielding provide access to the main board and other components.
1. On the rear cover side, remove the input and keypad panel cover.
2. Remove the six M3 screws with a Phillips #1 screwdriver.
3. On the front cover side, remove the two M3 screws with a Phillips #1 screwdriver.
4. Slide the top cover towards the front of the projector and lift it.
5. If required, replace the top cover.
6. To re-install the top cover, follow these steps in reverse order.
GS Series 1075 Service Manual
020-001236-02 Rev. 1 (12-2019)
63