Projector covers and
feet
Learn how to remove the covers and feet of the projector.
Removing the top cover
The top cover and top shielding provide access to the main board and other components.
1. Loosen the eight captive M3 screws on the top cover.
2. Slide the top cover towards the front of the projector and lift it.
3. Remove the 15 M3 screws securing the top shielding.
4. If required, replace the top cover.
5. To re-install the top cover, follow these steps in reverse order.
GS Series 700-850 Service Manual
020-001054-02 Rev. 1 (04-2017)
57