Projector Covers And Feet; Removing The Filter Doors; Replacing The Captive Lock Screws - Christie Boxer 4K Series Service Manual

Projector covers and
feet
Learn how to remove the covers and feet of the projector.

Removing the filter doors

The electronics-side and lamp-side filter doors are located at the front of the projector.
Estimated replacement time:
1. Using a M4 screwdriver, loosen the two screws securing the filter door.
2. Pull out the filter door.
3. Repeat steps 1 and 2 for the other filter door.
4. If required, replace one or both filter doors.
5. To install the filter doors, repeat these steps in reverse order.

Replacing the captive lock screws

The captive lock screws secure the projector covers to the projector.
Estimated replacement time: 10 minutes
Boxer 4K Service Guide
020-101699-04 Rev. 1 (02-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
31