Safety Warning Labels; Table 2-1 Safety Warning Labels - Nordson Asymtek Spectrum Series Installation, Operation & Maintenance Manual

2.7

Safety Warning Labels

Safety warning labels on the S-920 Dispensing System point out potentially hazardous areas and remind
personnel to take necessary safety precautions. Table 2-1 describes safety warning labels that may be on
the dispensing system.
WARNING!
Warning Type Symbol
Electrical
(Shock Hazard)
General
Warning
Heavy Object
(Lifting Hazard)
Moving Parts
Present
Hand
Entanglement/
Moving Material
Hot Surface
Laser
Consult
Operator's
Manual
Notes: (1) Rectangular labels with symbols and text. These labels are placed on machines that are shipped anywhere but the
European community.
(2) Triangular labels with symbols only. These labels are placed on machines that are shipped to the European
community, referred to as "CE labeled" machines.
2-6
CAUTION!
Comply with all safety warning labels or serious injury to personnel or damage to
the dispensing system may occur. Worn or damaged labels should be replaced
with new labels having the same part number.

Table 2-1 Safety Warning Labels

Part
(1)
Number
(1)
70-0116-00
or
(2)
70-0050-00
(2)
70-0055-00
(1)
70-0118-00
or
(2)
196666
(1)
70-0120-00
or
(2)
198883
(1)
7214364
(1)
70-0121-00
or
(2)
70-2150-00
(2)
7206858
7206854
This label warns of a high-voltage component that can
cause shock, burn, or death. Use extreme caution
when working in or around these areas.
Disconnect and lock out power before servicing.
This label identifies a component that requires special
attention. Can cause serious bodily harm to the user.
Disconnect and lock out power before servicing.
This label warns that the labeled component is heavy
and can cause muscle strain or back injury to
personnel trying to lift it.
This label warns of moving parts that can cause
serious injury to hands or fingers. Keep hands away
from moving parts.
Disconnect and lock out power before servicing.
This label warns of moving parts that can cause
serious injury to hands and fingers.
Disconnect and lock out power before servicing.
Thermal warning labels identify potentially hot
components and surfaces. Use extreme caution when
working on or around these areas.
Can cause severe burns.
Warns personnel of the possibility of hazardous
radiation exposure if your system is equipped with a
Laser Height Sensor or other laser device.
Warns personnel to read Operator's Manual before
operating machine.
Hazard
Safety